This section describes how to use the auto cleaning function for the main unit and feeder.
<Clean Feeder>
<Adjustment/Maintenance> <Maintenance>
If streaks appear on originals scanned with the feeder or paper that is printed, execute <Clean Feeder>. Cleaning the Feeder
<Clean Transfer Roller>
<Adjustment/Maintenance> <Maintenance>
If the back side of printed paper is smudged, execute <Clean Transfer Roller> as necessary.
The cleaning process cannot be canceled once it begins. Please wait until it is completed.
<Clean Drum>
<Adjustment/Maintenance> <Maintenance>
Printed images may be light or distorted when the machine is used immediately after installation, when the machine is not used for a long period of time, or when continuously using special paper in high temperature and high humidity environments. If printed images are light or distorted, perform an automatic drum cleaning as necessary.
Drum cleaning cannot be performed during printing.
<Clean Pressure Roller for Fixing>
<Adjustment/Maintenance> <Maintenance>
If printed paper is dirty, execute <Clean Pressure Roller for Fixing>.
Plays the sample video explaining the method for replacing toner cartridges. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.
Plays the sample video explaining the method for removing jammed paper. You can play this sample video even when paper is not jammed, so that you may understand the process in advance.
<Drum Unit>
<Adjustment/Maintenance> <Maintenance> <Initialize After Replacing Parts>
After replacing the drum unit, execute <Drum Unit> to perform initialization.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.
<Adjustment/Maintenance> 
Portal Top
