Setting the Envelope Sealing Prevention Mode (C477 Series Only)

84LW-0SE
If the glue on envelope flaps melts and seals due to the heat and pressure of the fixing unit during envelope printing, perform the following operation.
1
Press  (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Image Quality>  <Special Processing>  <Envelope Sealing Prevention Mode>.
2
Press <On>  <OK>.
This setting is only enabled during envelope printing.
If this setting is set to <On>, the quality of the image may be adversely affected.

Find manuals for other products
imageRUNNER ADVANCE DX C357i / C357P / C257i
User's Guide (Product Manual)
USRMA-4830-022022-04Copyright CANON INC. 2022