Paper Jams in the Feeder

Check the paper jam location on the screen, and follow the procedure below to remove the original.
1
Remove the originals in the original supply tray.
2
Check whether an original is jammed in the feeder cover.
Open the feeder cover.
If an original is jammed, gently pull it out in the direction of the arrow.
If you cannot remove the jammed original, proceed to the next step without forcibly removing it.
3
Check whether an original is jammed in the original output tray.
Lift the original supply tray.
If an original is jammed, gently pull it out in the direction of the arrow.
Return the original supply tray back into position.
4
After removing all jammed originals, close the feeder cover.
5
Lift up the feeder, and check if there is a jammed original.
Lift up the feeder, and check the position indicated by .
If an original is jammed, gently pull it out in the direction of the arrow.
6
Return the feeder to its original position.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.
When closing the feeder, take care that your eyes are not exposed to light emitted through the platen glass.
85F6-01X