Fax Function

The optional Super G3 FAX Board is needed to use the Fax function.

Telephone Line Used*1	Public Switched Telephone Network (PSTN)
Scan Line Density	Normal G3: 8 pels2/mm x 3.85 line/mm Fine G3: 8 pels2/mm x 7.7 line/mm Super-Fine G3: 8 pels2/mm x 15.4 line/mm Ultra-Fine G3: 16 pels2/mm x 15.4 line/mm
Transmission Speed	Super G3: 33.6 kbps G3: 14.4 kbps
Compression Method	MH, MR, MMR, JBIG
Transmission Type	Super G3, G3
Sending Original Sizes	A4, B53, A53, A6*3, LGL, LTR, and STMT
Receiving Paper Sizes	A4, B5, A5, LGL, LTR, STMT, and 16K
No. of Memory RX Jobs	Up to 320 jobs
Transmission Times	Approximately 2.6 seconds (When sending A4 Canon original paper, Normal 8 pels x 3.85 line/mm ECM (JBIG))

*1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is recommended to use facsimile communication via a general telephone (Public Switched Telephone Network) line.

*2 Pels stands for picture elements (pixels).

*3 Sent as A4.

Max. Destinations for Sequential Broadcast Transmission

You can specify and send to up to 256 destinations at the one time. (If you specify a group, which is made up of several destinations, each destination is counted as a separate destination.)