Transparency Interleaving


[Off]*, [Blank], [Printed]

If you are printing on transparencies, you can use this setting to output a sheet of paper after each transparency. The paper can be blank, or it can be a paper copy of the transparency.

[Off]

No sheets are interleaved with the transparencies.

[Blank]

A blank sheet of paper is inserted between each transparency.

[Printed]

A printed paper from the print job is inserted between each transparency.

NOTE
This mode is available only if you set [Copy Set Numbering] to [Off].
When printing multiple copies, [Offset+Group] for [Finishing] cannot be used.
If the Finishing mode are specified as [Rotate+Group], [Offset+Group], [Staple+Group], and [Eco(Stpl-Fr)+Grp], then [Rotate+Collate], [Offset+Collate], [Staple+Collate], and [Eco(Stpl-Fr)+Grp] are specified.
If you select [Printed], the paper printouts are included in the Prints count. However, if you select [Blank], they are not included in the Prints count.
6C04-00W