Inner Finisher-H

Paper Sizes
Paper available for the Main Unit (Supported Paper Sizes)
Paper Weight
52 g/m2 to 300 g/m2
Paper Type
Paper available for the Main Unit (Supported Paper Types)*1
Capacity Per Tray*2
Upper Tray (Tray B)
No Collating/Collate/Group mode:
45 sheets (80 g/m2) (or 5.2 mm in height)
50 sheets (75 g/m2 / 64 g/m2) (or 5.2 mm in height)
Lower Tray (Tray A)
No Collating/Collate/Group mode:
A4, B5, A5, A5R, LTR, STMT, STMTR, EXEC, and 16K: 500 sheets (or 52 mm in height)
320 mm x 450 mm (SRA3), 305 mm x 457 mm, A3, B4, A4R, B5R, 11" x 17", LGL, LTRR, 8K, and 16KR: 250 sheets (or 26 mm in height)
A6R: 30 sheets
Envelopes: 10 sheets
No Collating/Collate/Group mode with different paper sizes:
Combination of A4, B5, and LTR: 500 sheets (or 52 mm in height)
All other combinations: 250 sheets (or 26 mm in height)
Collate + Offset and Group + Offset mode:
A4, B5, LTR, EXEC, and 16K: 500 sheets (or 52 mm in height)
A3, B4, A4R, 11"x17", LGL, LTRR, and 8K: 250 sheets (or 26 mm in height)
Staple (Corner/Double) mode:
A4, B5, LTR, EXEC, and 16K: 30 sets (or 52 mm in height)
A3, B4, A4R, 11" x 17", LGL, LTRR, and 8K: 30 sets (or 26 mm in height)
Staple (Eco) mode:
A4, B5, LTR, and 16K: 30 sets (or 52 mm in height)
A3, B4, 11" x 17", and 8K: 30 sets (or 26 mm in height)
Staple
Max. Stapling Capacity*3
Staple (Corner/Double):
A4, B5, LTR, EXEC, and 16K:
50 sheets (52 g/m2 to 90 g/m2)
30 sheets (91 g/m2 to 105 g/m2)
2 sheets (106 g/m2 to 256 g/m2)
A3, B4, A4R, 11" x 17", LGL, LTRR, and 8K:
30 sheets (52 g/m2 to 90 g/m2)
20 sheets (91 g/m2 to 105 g/m2)
2 sheets (106 g/m2 to 256 g/m2)
Coated paper: 2 sheets
Staple (Eco):
A3, B4, A4, B5, 11" x 17", LTR, 8K and 16K:
5 sheets (52 g/m2 to 64 g/m2)
4 sheets (65 g/m2 to 81.4 g/m2)
3 sheets (82 g/m2 to 105 g/m2)
Manual Staple:
All sizes:
Approximately 50 sheets (52 g/m2)
Approximately 45 sheets (64 g/m2)
Approximately 40 sheets (80 g/m2 / 75 g/m2)
Punching
(When the inner puncher unit is attached)
Paper Sizes
When the Inner 2/4 Hole Puncher-B is attached:
Two Holes: A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", LGL, LTR, LTRR, EXEC, 8K, 16K, and 16KR
Four Holes: A3, A4, 11" x 17", LTR, EXEC, 8K, and 16K
When the Inner 4 Hole Puncher-B is attached:
Four Holes: A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", LGL, LTR, LTRR, EXEC, 8K, 16K, and 16KR
Paper Weight
52 g/m2 to 300 g/m2
Punch Hole
Two/Four Holes or Four Holes
Dimensions
(W x D x H)
466 mm x 525 mm x 225 mm
Weight
Approximately 8.6 kg
Installation Space Including the Main Unit
(W x D)
1,066 mm x 722 mm (when the auxiliary tray is extended)
*1 You cannot use Thin paper (52 g/m2 to 59 g/m2 ) for two-sided copying/printing, paper with width of 216 mm or more (257 g/m2 or more), and tab paper.
*2 For 80 g/m2 / 75 g/m2 / 64 g/m2 paper only. Capacity varies in other cases.
*3 When the standard staple cartridge is attached. (The maximum stapling capacity may vary, depending on the paper type and weight.)
6RS2-0W4