Adjusting Print and Finish Quality

Adjust the settings below if printing results are not satisfactory, or if you want to adjust the paper folding position.

Gradation Adjustment

If color gradation reproducibility has become so poor that the printed gradation differs markedly from the print data, make adjustments to improve color gradation reproducibility.
Adjusting Gradation

Density Correction

If the density of the printing is significantly different from the original document, this adjusts the scan density to be closer to the original.
Adjusting Density

Shading Correction

If the image areas of the printing have uneven density, this correction adjusts the printing so that the density is even.
Correcting Uneven Density

Image Size Adjustment

If the size of the image copied is slightly different from the original, fine adjustment is performed so that the printed size more closely matches the size of the original.
Adjusting Image Size

Dither Pattern Setting

A dither pattern suitable for an image is set to enable the gradations and curves in the image to be reproduced as smoothly as possible in the print.
Setting the Dither Pattern

Saddle Stitch Position Adjustment

If the saddle stitch position of the paper is not exactly in the middle of the booklet, you can make adjustments to the saddle stitch position.
Adjusting the Saddle Stitch Position

Saddle Stitch Folding Position Adjustment

You can adjust the saddle stitch folding position during booklet printing.
Adjusting the Saddle Stitch Folding Position

Paper Folding Position Adjustment

You can adjust the folding position of paper when setting each type of folding configuration.
Adjusting the Paper Folding Position
6LW3-0LK