Setting Up Using the Setup Guide

When the machine is turned on (Turning ON the Machine) for the first time, the Setup Guide starts up to assist you to configure the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the setting screens are displayed in the following order.

Step 1

Setting the Display Language and the Country or Region

Set the language to be displayed on the operation panel screen or in reports, as well as the country or region where the machine will be used.

1	Select a language.
2	Select <Yes>.
3	Select a country or region.

Step 2

Setting the Date and Time

Adjust the machine's date/time.

1	Select a time zone. What is UTC? Coordinated Universal Time (UTC) is the primary time standard by which the world regulates clocks and time. The correct UTC time zone setting is required for Internet communications.
2	Enter the date and time, and select <Apply>. Tap the entry field, and enter the date and time.

Step 3

Setting the Access Security Measures

Set the System Manager ID of the system manager account and a PIN to access the Remote UI. You can only use the Remote UI if you set a PIN.

1	Select <Yes>. If you select <No>, the settings required for using the Remote UI are not configured, and the Setup Guide proceeds to step 4.
2	Select <Yes>. If you select <No>, the System Manager ID and PIN are not changed from the default settings, and the Setup Guide proceeds to number 4 in this step.
3	Specify the System Manager ID and PIN. Specify the <System Manager ID> <System Manager PIN>. Enter numbers for each item, and select <Apply>. The Confirm screen is displayed. Enter the PIN once again to confirm. Do not forget your PIN. You cannot register an ID or PIN that consists only of zeros, such as "00" or "0000000."
4	Select <Yes>. If you select <No>, a Remote UI Access PIN is not set, and the Setup Guide proceeds to step 4.
5	Specify the Remote UI Access PIN. Enter a PIN, and select <Apply>. The Confirm screen is displayed. Enter the PIN once again to confirm. Do not forget your PIN. You cannot register a PIN that consists only of zeros, such as "00" or "0000000."

Step 4

Configuring Automatic Cleaning of the Fixing Assembly

Configure to automatically clean the fixing assembly.

1	Check the message displayed on the screen, and select <Yes>. If you select <No>, automatic cleaning is not set, and the Setup Guide proceeds to step 5. You can set automatic cleaning of the fixing assembly later. <Auto Clean Fixing Assembly>
2	Select <On>. If you select <Off>, automatic cleaning is not set, and the Setup Guide proceeds to step 5.
3	Set available paper sources to <On>. When cleaning is performed, paper is fed from the paper source for which you set <On>. You can use the following paper for cleaning. Paper sizes: A4/Letter Paper types: Plain 1 to 3/Recycled 1 or 2
4	Select <Apply>.

Step 5

Setting the Wireless LAN

Configure the settings to connect to the network using the wireless LAN.

1	Select <Yes>. If you select <No>, wireless LAN is not set, and the Setup Guide proceeds to step 6.
2	Select <OK>.
3	Select the setting method. For more information about the wireless LAN settings, see Connecting to a Wireless LAN.

Step 6

Viewing Application Library

The one-touch button referred to as "Application Library" is provided in the Home screen. You can read the description of each function.

1	To finish the Setup Guide, select <End>.

When the Setup Guide is complete, the Home screen appears.