Output Tray Designation

You can designate which output tray to use for specific functions.
The output trays indicated by Tray A, B, or C vary according to the attached optional products.
This mode can be set when either of the following optional products is attached.
Options Attached
Default Setting
Tray A/B/C
Staple Finisher-W PRO
Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 1 Receive, 1 Other
Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 2 Receive, 2 Other
Booklet Finisher-W PRO
Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 1 Receive, 1 Other
Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 2 Receive, 2 Other
Staple Finisher-W PRO + High Capacity Stacker-H
Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 2 Receive, 2 Other
Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 3 Receive, 3 Other
Tray C: 1 Receive, 1 Other
Booklet Finisher-W PRO + High Capacity Stacker-H
Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 2 Receive, 2 Other
Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 3 Receive, 3 Other
Tray C: 1 Receive, 1 Other
Staple Finisher-AC
Tray A: 1 Receive, 1 Other
Tray B: 1 Copy, 1 Access Stored Files, 1 Printer
Tray C: 2 Copy, 2 Access Stored Files, 2 Printer
Booklet Finisher-AC
Tray A: 1 Receive, 1 Other
Tray B: 1 Copy, 1 Access Stored Files, 1 Printer
Tray C: 2 Copy, 2 Access Stored Files, 2 Printer
1
Press .
2
Press [Function Settings] → [Common] → [Paper Output Settings].
3
Press [Output Tray Settings].
4
Set the output and priority settings for Tray A/B/C → press [OK].
[Other] is used for setting the priority for printing reports.
If you want to use an output tray for only one function, select only that function.

If a certain tray reaches its stacking limit, the machine automatically uses another tray that is designated for the same function. However, it is recommended that you only designate one tray for I-fax documents to prevent them from getting lost.
You can designate an output tray for multiple functions.
The priority order of the output destinations is determined by the order of the selected output trays. The priority is displayed as "1" and "2."
If High Volume Stack Mode is set to "On", the output order for Tray B is set to "1", so that a priority to Tray B cannot be changed. However, if the output order for Tray C is set to "1" when the High Capacity Stacker-H is attached, the priority is given to Tray C. High Volume Stack Mode
6R30-00C