Adjusting the Saddle Stitch Fold Position and Staple Position
Adjust the saddle stitch fold position and staple position so that they are at the center of the paper. Print a test page, check the current state of the fold position and the shift width on the test page, and then perform adjustment.
1
Press 
(Settings/Registration) 
<Adjustment/Maintenance> <Adjust Action> <Adjust Saddle Stitch Fold Position/Stitch Position>.
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action> <Adjust Saddle Stitch Fold Position/Stitch Position>.2
Check the displayed instructions, and press <Next>.
If the test page has already been printed, press <Do Not Print Test Page> to select it, and then press <Next>.
3
Select the paper source with the loaded usable paper, and press <Start Printing>.
A test page is printed.
4
Select the current state of the fold position and set the shift width.
Check the current state of the fold position and the shift width on the test page.
5
Press <Next>.
6
Select the current state of the staple position and set the shift width.
Check the current state of the staple position and the shift width on the test page.
7
Press <OK>.
8
Press <Start Printing> to print the test page again, and check the adjustment results.
To end the adjustment without printing the test page, press <Close>.
9
Press <Done>.
If further adjustment is needed, press <Re-Adjust> and repeat Steps 4 to 8.