Paper Jams in the Feeder
Check the paper jam location on the screen, and follow the procedure below to remove the original.
1
Remove the originals in the original supply tray.
2
Pull the lever to open the cover.
3
If an original is jammed in the feeder cover, gently pull it out in the direction of the arrow.
If you cannot remove the jammed original, proceed to the next step without forcibly removing it.
4
Check whether an original is jammed in the original output tray.
| Turn the green knob counterclockwise.  |
 | If an original is jammed, gently pull it out in the direction of the arrow.  |
5
After removing all jammed originals, close the feeder cover.
6
Lift up the feeder, and check if there is a jammed original.
| Lift up the feeder, and check the position indicated by  . |
| If an original is jammed, gently pull it out in the direction of the arrow.  |
7
Return the feeder to its original position.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.