Paper Jams in the Booklet Finisher-AB
|
Confirm before handlingIf there is any paper in the booklet tray, remove it. |
1
Open the cover of the buffer pass unit.
2
Check whether paper is jammed.
If paper is jammed, gently pull it out in the direction of the arrow.
3
Close the cover of the buffer pass unit.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.
4
Check whether paper is jammed in the finisher.
| Open the front cover of the finisher. |
| Lift up the output tray paper supporter of Tray B. |
| Turn the green knob to feed the jammed paper to the Tray B side. |
| If paper comes out of the outlet of Tray B, gently pull the paper out in the direction of the arrow. |
5
Check whether paper is jammed in the delivery unit.
| Open the escape delivery guide ( ). If paper is jammed, gently pull it out in the direction of the arrow. |
| Lift up the first flapper ( ). If paper is jammed, gently pull it out in the direction of the arrow. |
| Return the first flapper ( ) to its original position. |
| Lower the escape delivery guide ( ). |
6
Turn the green knob about 10 times.
If you do not turn the knob, the jammed paper may tear when the saddle stitcher unit is pulled out.
7
Pull out the saddle stitcher unit.
8
Open the transparent guide (
), and check whether there is any jammed paper.
If paper is jammed, gently pull it out in the direction of the arrow.
9
Close the transparent guide.
10
Return the saddle stitcher unit to its original position.
11
Close the front cover of the finisher.