<Maintenance>

This section describes how to use the auto cleaning function for the main unit and feeder.

<Clean Feeder>

(Settings/Register)

If streaks appear on originals scanned with the feeder or paper that is printed, execute <Clean Feeder>. Cleaning the Feeder

<Clean Pressure Roller for Fixing>

(Settings/Register)

If printed paper is dirty, execute <Clean Pressure Roller for Fixing>.

＜Original Scanning Area Cleaning Method＞

(Settings/Register)

Start the video that shows how to clean the platen glass.

<Replace Toner Cartridge>

(Settings/Register)

Plays the sample video explaining the method for replacing toner cartridges. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Replace Waste Toner Container>

(Settings/Register)

Plays the sample video explaining the method for replacing the waste toner container. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Remove Jammed Paper (Example)>

(Settings/Register)

Plays the sample video explaining the method for removing jammed paper. You can play this sample video even when paper is not jammed, so that you may understand the process in advance.

<Low Toner Consumption Printing Mode>

(Settings/Register)

If you do not expect to use much yellow toner, set this to <On> before installing the yellow toner cartridge.


If you set this to <On>, the print speed may be slower.

<Control Detected Condensation>

(Settings/Register)

Set whether to start the process to remove condensation when condensation is detected inside the machine. If you set this mode to <On>, the process to remove condensation is automatically performed.


During the process to remove condensation, printing may not be performed correctly resulting in the paper being blank. To maintain the effect of the process to remove condensation going when this mode is set to <On>, it is necessary to keep the machine's power ON.


Print jobs that are carried out during the process to remove condensation are restricted by the <Jobs to Restrict When Condensation is Detected> settings. <Only Received Jobs>: Regardless of the <Use Fax Memory Lock>/<Use I-Fax Memory Lock> settings, the received fax/I-fax data is stored in Memory RX Inbox and cannot be printed during the process to remove condensation. Reports that are automatically output at the specified time cannot be printed. <All Jobs>: All print data cannot be printed during the process to remove condensation. If you select <On> and press <OK>, a screen asking whether to immediately perform the process to remove condensation is displayed. If you want to immediately start the process to remove condensation, press <Yes>.

Print jobs that are carried out during the process to remove condensation are restricted by the <Jobs to Restrict When Condensation is Detected> settings.

<Only Received Jobs>: Regardless of the <Use Fax Memory Lock>/<Use I-Fax Memory Lock> settings, the received fax/I-fax data is stored in Memory RX Inbox and cannot be printed during the process to remove condensation. Reports that are automatically output at the specified time cannot be printed.

<All Jobs>: All print data cannot be printed during the process to remove condensation.

If you select <On> and press <OK>, a screen asking whether to immediately perform the process to remove condensation is displayed. If you want to immediately start the process to remove condensation, press <Yes>.