Fax Function

The optional Super G3 FAX Board is needed to use the Fax function.
Telephone Line Used*1
Public Switched Telephone Network (PSTN)
Scan Line Density
Normal
G3: 8 pels*2/mm x 3.85 line/mm
Fine
G3: 8 pels*2/mm x 7.7 line/mm
Super-Fine
G3: 8 pels*2/mm x 15.4 line/mm
Ultra-Fine
G3: 16 pels*2/mm x 15.4 line/mm
Transmission Speed
Super G3: 33.6 kbps
G3: 14.4 kbps
Compression Method
MH, MR, MMR, JBIG
Transmission Type
Super G3, G3
Sending Original Sizes
A4, B5*3, A5*3, A6*3, LGL, LTR, and STMT
Receiving Paper Sizes
A4, B5, A5, LGL, LTR, STMT, and 16K
No. of Memory RX Jobs
Up to 320 jobs
Transmission Times
JBIG: Approximately 2.6 seconds (When sending A4 Canon original paper, Normal 8 pels x 3.85 line/mm ECM (JBIG))
*1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is recommended to use facsimile communication via a general telephone (Public Switched Telephone Network) line.
*2 Pels stands for picture elements (pixels).
*3 Sent as A4.
7EJY-0W1