<Enter Manually>
Enter the SSID of the wireless LAN router to connect to, and select the security settings.
Select the security settings configured on the wireless LAN router side.
If you selected <None>
Select <None>, and press <OK>.
<Connected.> is displayed on the screen when the wireless LAN router is detected.
Press <Next>.
Proceed to the next step
<Use IP Address>If you selected <WEP>
Select <WEP>, and press <OK>.
Select the authentication method set in the wireless LAN router, and press <Next>.
When shared key authentication is set on the wireless LAN router, you cannot connect with <Open System> selected. If you selected <Open System>, the setting automatically changes to <Shared Key> and reconnection is performed.
Select one of <WEP Key 1> to <WEP Key 4>, and enter the WEP key.
Select the WEP key to use, and press <OK>.
<Connected.> is displayed on the screen when the wireless LAN router is detected.
Press <Next>.
Proceed to the next step
<Use IP Address>
If you selected <WPA/WPA2-PSK>
Select <WPA/WPA2-PSK>, and press <OK>.
Select <Encryption Method>, enter the key in <PSK>, and press <OK>.
<Auto>: The machine automatically sets AES-CCMP or TKIP according to the settings of the wireless LAN router to connect to.
<Connected.> is displayed on the screen when the wireless LAN router is detected.
Press <Next>.
Proceed to the next step
<Use IP Address>If you selected <WPA/WPA2-EAP>
Select <WPA/WPA2-EAP>, and press <OK>.
Press <OK>.
<Connected.> is displayed on the screen when the wireless LAN router is detected.
Press <Next>.
Proceed to the next step
<Use IP Address>