<Auto Adjust Gradation>
Perform adjustment for printing images. Select <Full Adjust> to perform full adjustment or <Quick Adjust> to perform quick adjustment.
If you do not want to perform adjustment, press <Skip> and proceed to <Output Report>.
If you selected <Full Adjust>
Select the paper to use, and press <OK>.
Press <Start Printing> to print Test Page 1.
Place Test Page 1 on the platen glass and press <Start Scanning>.
Press <Start Printing> to print Test Page 2. Remove Test Page 1 from the platen glass, as it is not used in the subsequent steps.
Place Test Page 2 on the platen glass and press <Start Scanning>.
Adjustment is automatically performed when scanning is complete.
Proceed to the next step <Output Report>
If you selected <Quick Adjust>
