Paper Jams in the Feeder
Check the paper jam location on the screen, and follow the procedure below to remove the original.
1
Remove the originals in the original supply tray.
2
Check whether an original is jammed in the feeder cover.
| Pull the lever to open the cover. |
| Remove the original. |
| If an original is jammed, gently pull it out in the direction of the arrow. If you cannot remove the jammed original, proceed to the next step without forcibly removing it. |
3
Check whether an original is jammed in the original output tray.
| Turn the green knob counterclockwise. |
| If an original is jammed, gently pull it out in the direction of the arrow. |
4
After removing all jammed originals, close the feeder cover.
5
Lift up the feeder. If an original is jammed, remove it.
| Lift up the feeder. |
| If an original is jammed, gently pull it out in the direction of the arrow. |
6
Return the feeder to its original position.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.
|
When closing the feeder, take care that your eyes are not exposed to light emitted through the platen glass. |