Adjusting Print Quality

Adjust the settings below if printing results are not satisfactory.

Gradation Adjustment

If color gradation reproducibility has become so poor that the printed gradation differs markedly from the print data, make adjustments to improve color gradation reproducibility.

Density Correction

If the density of the printing is significantly different from the original document, this adjusts the scan density to be closer to the original.

Shading Correction

If the image areas of the printing have uneven density, this correction adjusts the printing so that the density is even.

Color Mismatch Correction

If the colors of printing run or blur, color mismatch (color misregistration) may have occurred. The problem may be improved by performing color mismatch correction.

Vividness Setting

You can increase the saturation of colors for color printing.

Image Size Adjustment

If the size of the image copied is slightly different from the original, fine adjustment is performed so that the printed size more closely matches the size of the original.

Dither Pattern Setting

A dither pattern suitable for an image is set to enable the gradations and curves in the image to be reproduced as smoothly as possible in the print.

Toner Amount Reduction

You can prevent excessive toner from being fixed onto paper to reduce print failure such as poor toner fixing or bleed-through.