Sending/Saving Separately Scanned Documents Together (Job Build)

Even if you have too many originals to be placed in the feeder at the same time, you can scan the originals separately and send/save them as a batch of documents. Originals scanned with both the feeder and the platen glass can also be sent/saved at the same time.
Place the first original. Placing Originals
Press <Scan and Send>. <Home> Screen
Specify the destination on the Scan Basic Features screen. Scan Basic Features Screen
Specify the scan settings as necessary. Basic Operations for Scanning Originals
Press <Options> <Job Build>  <Close>.
Press  (Start) to scan the original.
When scanning is complete, the screen appears prompting you to scan the next original.
If you place your originals in the feeder, remove the originals from the original output area when the scanning of each batch is complete.
Place the next original and press  (Start).
Repeat this step until you finish scanning all of the originals.
To change the scan settings, press <Change Settings>.
If you place different size originals in the feeder, set the <Different Size Originals> mode. Sending/Saving Different Size Originals Together (Different Size Originals)
If you want to scan one-sided and two-sided originals and store them as two-sided documents, divide the originals into one-sided and two-sided batches. For example, if the first batch consists of two-sided originals, set the <2-Sided Original> mode. Thereafter, you have to manually set or cancel the <2-Sided Original> mode for each batch of originals that you scan.
The following functions can be used in <Change Settings>. Other functions must be configured in advance, as they cannot be changed during the Job Build mode.
<Select Color>
<Scan Size>
<2-Sided Original>
<Original Type>
Press <Start Sending>.
All scanned documents are combined into one and sent/saved to the specified destination.