Toolbar Icons

This section describes the icons displayed in the toolbar of each screen.
NOTE
The available icons differ depending on the screen.
Icons displayed on the [Inspection Settings] screen
Icon
Description
Undo the previously performed operation.
Redo an operation that was undone.
When this icon is selected, inspection areas can be selected or moved.
When this icon is selected, rectangular inspection areas can be created.
When this icon is selected, circular and elliptical inspection areas can be created.
Click this icon while an inspection area is selected to copy the selected inspection area.
Click this icon while an inspection area is selected to cut the selected inspection area.
Click this icon to paste the copied inspection area.
Click this icon while an inspection area is selected to delete the selected inspection area.
Icons displayed on the [Confirm Master Image] screen
Icon
Description
Displays the thumbnail of 1 sheet (both sides) on the screen.
Displays the thumbnails of 4 sheets (both sides) on the screen.
Displays the thumbnails of 9 sheets (both sides) on the screen.
Icons displayed on several screens
Icon
Description
[Create Master Image] screen:
Select whether to apply to the same face in other pages or to apply to all faces of other pages in [Rotate] and then click this icon to rotate the image on the selected face 90 degrees to the left.
Screens other than above:
Click this icon to rotate the displayed image 90 degrees to the left.
[Create Master Image] screen:
Select whether to apply to the same face in other pages or to apply to all faces of other pages in [Rotate] and then click this icon to rotate the image on the selected face 90 degrees to the right.
Screens other than above:
Click this icon to rotate the displayed image 90 degrees to the right.
When this icon is selected, you can change the area that is displayed on the screen by moving the image with the mouse. (Can be used when the entire screen image is not displayed on the screen.)
When the mouse pointer is moved over this icon, the inspection areas are displayed filled in with a color corresponding to the type. In places where there are overlapping areas, the higher priority areas are displayed at the top.
Displays the image larger.
Displays the image smaller.
Displays the entire image within the screen.