Saving Documents in Memory Media
Follow the procedures below to convert scanned documents into a file format commonly supported by a computer to save in memory media. This method is convenient when you need to move files to a computer not connected to a network.
|
You cannot store documents in the memory media if there is no free space available. |
1
Set the original.
Placing Originals2
Press <Scan and Store>.
<Home> Screen3
Press <Memory Media>.
4
Select the desired memory media.
5
Display the save location and press <Scan>.
6
Specify the scan settings as necessary.
7
Press
![](./images/book_images/b_key_Start.gif)
(Start).
Originals are scanned and saved as files.
To cancel scanning, press <Cancel> or
![](./images/book_images/b_key_Stop.gif)
(Stop)
![](./images/book_images/b_in_arrow_right.gif)
<Yes>.
When <Press the [Start] key to scan the next original.> is displayed![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Place the next original to scan and press
![](./images/book_images/b_key_Start.gif)
(Start). After scanning all of the originals, press <Start Storing> to save the file.
To check the result of saving, press
![](./images/book_images/b_key_sysmon.gif)
(Status Monitor)
![](./images/book_images/b_in_arrow_right.gif)
<Store>
![](./images/book_images/b_in_arrow_right.gif)
<Job Log>. If <NG> is displayed, the file is not saved successfully. Try the operation again.