<Network>

This section describes the network settings.

<Output Report>

<Set>

You can print the settings in <Network>. <Output Report>


This setting can only be specified from the Remote UI.

<Confirm Network Connection>

<Set>

If this setting is set to <On>, you can change network settings. If errors related to network connections occur, an error message appears on the screen of the machine.

<Use IPv4>

<Set>

Set whether to use IPv4. Setting an IPv4 Address

<IP Address Settings>

<Set>

Specify the IPv4 address. Setting an IPv4 Address

<DHCP Option Settings>

<Set>

Specify the optional settings for DHCP. Making DNS Settings

<Perform DNS Dynamic Update>

<Set>

Specify whether to perform the automatic update when the mapping between the host name and IP address is changed on an environment such as DHCP. Making DNS Settings


This setting can only be specified from the Remote UI.

<PING Command>

<Set>

Tests whether the IPv4 address is set correctly. Conducting a Connection Test for an IPv4 Address

<Use IPv6>

<Set>

Specify whether to use IPv6. Setting an IPv6 Address

<Use Stateless Address>

<Set>

Specify whether to use the IPv6 stateless address. Setting an IPv6 Address


This setting can only be specified from the Remote UI.

<Use Manual Address>

<Set>

Specify the IPv6 address manually. Setting an IPv6 Address


This setting can only be specified from the Remote UI.

<Use DHCPv6>

<Set>

Specify whether to obtain the IPv6 address from the DHCP server. Setting an IPv6 Address


This setting can only be specified from the Remote UI.

<Only Retrieve Stateful Address Prefix>

<Set>

Specify whether to obtain only the former half of the stateful address from the DHCP server by using DHCPv6.

<DHCP Option Settings>

<Set>

Specify the optional settings for DHCP. Making DNS Settings

<DNS Server Address Settings>

<Set>

Specify the DNS server address settings. Making DNS Settings

<mDNS Settings>

<Set>

Specify settings for using the DNS function on a system that does not have a DNS server. Making DNS Settings

<LPD Print Settings>

<Set>

Specify settings for LPD printing. To use LPD printing, select <On> and set the time until the job is automatically canceled when the print data cannot be received due to a communication error, etc.


Banner pages are set to be output by print job. Even if <Output LPD Banner Page> is set to <On>, banner pages are not output for print jobs that are set to not output a banner page.

<RAW Print Settings>

<Set>

Specify settings for RAW printing. To use RAW printing, select <On> and set whether to use bidirectional communication and the time until the job is automatically canceled when the print data cannot be received due to a communication error, etc.

<SNTP Settings>

<Set>

Specify settings for Simple Network Time Protocol (SNTP). Making SNTP Settings

<FTP Print Settings>

<Set>

Specify settings for FTP printing. To use FTP printing, select <On>, and set <User Name> and <Password> as necessary.

<Use UTF-8 to Display FTP Print Job Name>

<Set>

Specify whether to use UTF-8 for displaying file names when you perform FTP print.

<WSD Settings>

<Set>

Specify the WSD settings. To use WSD (Web Service on Devices) for the print application, set <Use WSD Printing> to <On>. To use WSD to retrieve the information for the machine, set <Use WSD Browsing> to <On>.


If you set <Use WSD Printing> to <On>, <Use WSD Browsing> and <Use HTTP> are also set to <On>.

<IPP Print Settings>

<Set>

Specify settings for IPP printing. To use IPP printing, select <On> and set whether to only allow communication data encrypted with TLS (IPP printing) and whether to use IPP authentication.


If you set this to <On>, <Use HTTP> is also set to <On>. To perform IPPS printing, a key pair to use is required. You can use a preinstalled key pair or an original key pair generated by the machine as the key to use. For information on the key to use and the method for generating an original key pair, see Generating the Key and Certificate for Network Communication or Registering a Key and Certificate for Network Communication. If you select <RSA> for <Key Algorithm> when generating the key to use for network communication, set a key length of <1024-bit> or longer. IPPS printing may not be able to be performed correctly if a key length of <512-bit> is set, depending on the operating system you are using. To use the IPP authentication function by setting <Use Authentication> to <On>, the user information of the machine is used as the user and password for IPP authentication. Make sure to register the user information in advance when using the IPP authentication function. Registering User Information in the Local Device

If you set this to <On>, <Use HTTP> is also set to <On>.

To perform IPPS printing, a key pair to use is required. You can use a preinstalled key pair or an original key pair generated by the machine as the key to use. For information on the key to use and the method for generating an original key pair, see Generating the Key and Certificate for Network Communication or Registering a Key and Certificate for Network Communication. If you select <RSA> for <Key Algorithm> when generating the key to use for network communication, set a key length of <1024-bit> or longer. IPPS printing may not be able to be performed correctly if a key length of <512-bit> is set, depending on the operating system you are using.

To use the IPP authentication function by setting <Use Authentication> to <On>, the user information of the machine is used as the user and password for IPP authentication. Make sure to register the user information in advance when using the IPP authentication function. Registering User Information in the Local Device

<Multicast Discovery Settings>

<Set>

Specify the multicast discovery settings. Monitoring the Machine From Device Management Systems

<Sleep Mode Notification Settings>

<Set>

Specify settings for multicast sending of the Sleep mode notifications on the network.


This setting can only be specified from the Remote UI.

<Use HTTP>

<Set>

Enable or disable HTTP setting.


By specifying this setting as <On>, you can open a necessary port. However, it is recommended that you specify it as <Off>, if a port is not used. If you leave the port open, an unauthorized user may access the machine.


If you set this to <Off>, the following settings are also set to <Off>. <Remote UI Settings> <IPP Print Settings> <Use WSD Printing> in <WSD Settings> <Use WebDAV Server>

<TLS Settings>

<Set>

You can set a key pair, TLS version, and encryption algorithm to use after confirming that a machine uses TLS encrypted communication. Configuring the Key and Certificate for TLS


This setting can only be specified from the Remote UI.

<Proxy Settings>

<Set>

Specify settings for the proxy. Setting a Proxy

<Confirm Auth Info When in Auth Mngt Mode>

<Set>

Specify whether the machine checks authentication information when you print using the V4 printer driver.


If there is no key to use for TLS communication or it is corrupted, this setting is disabled. Configuring the Key and Certificate for TLS

<IPSec Settings>

<Set>

Specify the IPSec settings. Configuring the IPSec Settings

<IPSec Policy List>

<Set>

You can register IPSec policies and set priorities.


This setting can only be specified from the Remote UI.

<TCP/IP Option Settings>

<Set>

Specify the TCP option window scale and MTU size.


This setting can only be specified from the Remote UI.

<SNMP Settings>

<Set>

Specify the SNMP settings. Monitoring and Controlling the Machine with SNMP

<Format Host Resources MIB to RFC2790>

<Set>

Specify whether the host resources MIB is compliant with the specifications of RFC2790.

<Dedicated Port Settings>

<Set>

Specify whether to configure/refer to detailed information of the machine from the Canon drivers or utility software.


If the setting is set to <Off>, some application that uses dedicated port may not be used. This setting can only be specified from the Remote UI.

<Dedicated Port Authentication Method>

<Set>

Specify the authentication method for the dedicated port.


If the setting is set to <Mode 2>, communication using a dedicated port uses a secure mode. Accordingly, you may not be able to connect from device management software or drivers, etc. This setting can only be specified from the Remote UI.

<Use Spool Function>

<Set>

Specify whether to spool print jobs that are sent to the machine in the storage device of the machine.

<Receive in Parallel>

<Set>

Specify whether to efficiently process the data when multiple print jobs are sent to the machine. If this is set to <Off>, the data is printed in the order of reception, but the print speed may be slower.

<Waiting Time for Connection at Startup>

<Set>

Specify the waiting time for connecting to a network from when the machine starts. Setting the Wait Time When Connecting to a Network

<Ethernet Driver Settings>

<Set>

Specify the Ethernet driver settings. Making Ethernet Settings

<IEEE 802.1X Settings>

<Set>

Specify the settings for IEEE 802.1X. Configuring the IEEE 802.1X Authentication Settings


If you set <IEEE 802.1X Settings> to <On>, the machine will not completely enter the Sleep mode.

<Outbound Filter>

<Set>

Specify the outbound filter. Specifying IP Addresses in Firewall Settings

<Inbound Filter>

<Set>

Specify the inbound filter. Specifying IP Addresses in Firewall Settings

<Always Allow Sending/Receiving Using ICMP>

<Set>

Specify whether to always allow ICMP communication.


This setting can only be specified from the Remote UI.

<Outbound Filter>

<Set>

Specify the outbound filter. Specifying IP Addresses in Firewall Settings

<Inbound Filter>

<Set>

Specify the inbound filter. Specifying IP Addresses in Firewall Settings

<Always Allow Sending/Receiving Using ICMP>

<Set>

Specify whether to always allow ICMPv6 communication.


This setting can only be specified from the Remote UI.

<Outbound Filter>

<Set>

Specify the outbound filter. Specifying MAC Addresses in Firewall Settings

<Inbound Filter>

<Set>

Specify the inbound filter. Specifying MAC Addresses in Firewall Settings

<IP Address Block Log>

<Set>

Displays the log for blocking with an IP address filter. Specifying IP Addresses in Firewall Settings


This setting can only be specified from the Remote UI.

<Session Settings>

<Set>

Specify the timeout time after logging in to the Remote UI.


This setting can only be specified from the Remote UI.

<Use Mopria>

<Set>

Specify whether to print data directly from mobile devices that support Mopria®, such as smartphones and tablets. Utilizing the Machine through Applications

<Use AirPrint>

<Set>

Specify whether to print directly from an iPhone, iPad, iPod Touch, or Mac that supports AirPrint. Using AirPrint

<Display Errors for AirPrint>

<Set>

Specify whether to display an error screen on the control panel if printing cannot be performed as expected due to a problem with the print data when printing with AirPrint.

If this is set to <On>, an error screen is displayed on the control panel. Cancel the job after checking the error screen. If this is set to <Off>, an error screen is not displayed on the control panel but the job remains in the job history with <Error> indicated.

<Position Information>

<Set>

Specify the device position information settings. Using AirPrint


This setting can only be specified from the Remote UI.

<Settings for Universal Print>

<Set>

Specify the Universal Print settings. Printing Using the Microsoft Cloud Service (Universal Print)


This setting can only be specified from the Remote UI.

<Select Interface>

<Set>

Select whether to use a wired LAN or wireless LAN by itself, a wired LAN and wireless LAN simultaneously, or a wired LAN and another wired LAN simultaneously. Selecting the Network Connection Method

<Wireless LAN Settings>

<Set>

Specify the wireless LAN settings. Connecting to a Wireless LAN

<Wireless LAN Information>

<Set>

Displays the setting information of wireless LAN. Check the settings and information of the wireless LAN

<Power Save Mode>

<Set>

Specify whether to set the machine to the power save mode periodically, according to the signals sent by a wireless LAN router. Connecting to a Wireless LAN

<Use Direct Connection>

<Set>

Specify whether to use direct connection. Connecting Directly

<Direct Connection Type>

<Set>

Select the type of direct connection. Connecting Directly


If Wi-Fi Direct is selected, only one mobile device can connect.

<Device Name for Wi-Fi Direct>

<Set>

Specify the device name to use for direct connections (Wi-Fi Direct).


"-XY_Canon10" (where XY are random letters) is automatically appended to the device name for Wi-Fi Direct, unless the device name is 22 characters or more, in which case "-XY_Canon10" is not appended.

<Time Until Direct Connection Termination>

<Set>

Specify the time before communication is automatically terminated when there is a prolonged period of no data transmission/reception while communicating using direct connection.


This setting is disabled if <Keep Enabled If SSID/Net. Key Specified> is set to <On>.

<Access Point Mode Settings>

<Set>

Specify the settings for access point mode.


When <Use Personal SSID and Network Key> is set to <On> Information on the user and SSID/network key when logging in is associated and stored in the machine. Only one mobile device can be connected. When <Use Personal SSID and Network Key> is set to <Off> If both <Use Custom SSID> and <Use Custom Network Key> are set to <On>, multiple mobile devices can be connected at the same time. A maximum of five devices can be connected at the same time. If either or both <Use Custom SSID> and <Use Custom Network Key> are set to <Off>, a random SSID or network key is used to connect each time. Only one mobile device can be connected.

When <Use Personal SSID and Network Key> is set to <On>

Information on the user and SSID/network key when logging in is associated and stored in the machine. Only one mobile device can be connected.

When <Use Personal SSID and Network Key> is set to <Off>

If both <Use Custom SSID> and <Use Custom Network Key> are set to <On>, multiple mobile devices can be connected at the same time. A maximum of five devices can be connected at the same time.

If either or both <Use Custom SSID> and <Use Custom Network Key> are set to <Off>, a random SSID or network key is used to connect each time. Only one mobile device can be connected.

<Keep Enabled If SSID/Net. Key Specified>

<Set>

If <Specify SSID to Use> and <Specify Network Key to Use> are enabled in <Access Point Mode Settings>, direct connections can be made without pressing <Enable> in <Direct Connection> in <Mobile Portal>.


The machine can connect with multiple mobile devices at the same time. A maximum of five devices can be connected at the same time. If this is set to <On>, the <Time Until Direct Connection Session Is Terminated> setting is disabled. If this is set to <On>, the machine will not enter the Sleep mode completely.

<Direct Connection IP Address Settings>

<Set>

Specify the IP address to distribute to mobile devices connecting using direct connection.


The IP address distributed to mobile devices may be up to nine numbers greater than the value of the specified IP address.

<Use Personal SSID and Network Key>

<Set>

Specify an SSID and network key for each user when logging in and connecting using a direct connection. To set an SSID, set <Use Custom SSID> to <On>, and enter the SSID. To set a network key, set <Use Custom Network Key> to <On>, and enter the network key.


This setting can only be specified from the Remote UI.

<IP Address Settings>

<Set>

Specify the IPv4 address to use with a wireless LAN (sub line) when using both a wired LAN and wireless LAN at the same time.

<Priority Line for Comm w/Mobile Devices>

<Set>

Select the line to connect mobile devices to when using both a wired LAN (main line) and wireless LAN (sub line) at the same time.

<Ethernet Driver Settings>

<Set>

Specify the Ethernet driver settings for the sub line. Making Ethernet Settings

<Outbound Filter>

<Set>

Specify the transmission filter in the sub line settings. Configuring the Firewall of the Sub Line

<Inbound Filter>

<Set>

Specify the reception filter in the sub line settings. Configuring the Firewall of the Sub Line

<DNS Server Address Settings>

<Set>

Specify the DNS server address settings for the sub line. Making DNS Settings

<Proxy Settings>

<Set>

Specify the proxy settings for the sub line. Setting a Proxy

<Static Routing Settings>

<Set>

Specify the static routing settings for IPv4 addresses. Setting Static Routing