Network

<Output Report>

<Print>

<Confirm Network Connection
>

<Off>، ‏<On>

<Use IPv4>

<Off>، ‏<On>

<IP Address Settings>

<Auto Acquire>
　<Select Protocol>: <Off>، ‏<DHCP>
　<Auto IP>: <Off>، ‏<On>

<Manually Acquire>
　<IP Address>: آدرس IP را وارد کنید.

<Check Settings>

 <IP Address>: فقط نمایشگر

 <Subnet Mask>: فقط نمایشگر

 <Gateway Address>: فقط نمایشگر

<DHCP Option Settings>

<Acquire Host Name>: <Off>، ‏<On>

<DNS Dynamic Update>: <Off>، ‏<On>

<Acquire DNS Server Address>: <Off>، ‏<On>

<Acquire Domain Name>: <Off>، ‏<On>

<Acquire POP Server Address>: <Off>، ‏<On>

<Release Address Last Acquired from DHCP Server When Address Cannot Be Acquired>*1: <Off>، ‏<On>

<DNS Settings>*1

<Host Name>: ‏Canon****** ("******" شش رقم آخر آدرس MAC را نشان می‌دهد.)

<Domain Name>: نام دامنه را وارد کنید.

<Perform DNS Dynamic Update>: <Off>، ‏<On>

<PING Command>

<IPv4 Address>: <0.0.0.0>

<Use IPv6>

<Off>، ‏<On>

<Use Stateless Address>*1: <Off>، ‏<On>

<Use Manual Address>*1: <Off>، ‏<On>

<IP Address>*1(آدرس IPv6 (حداکثر 39 نویسه))

<Prefix Length>*1: 1 تا 64 تا 128

<Default Router Address>*1 (حداکثر 39 نویسه)

<Use DHCPv6>*1: <Off>، ‏<On>

<Only Retrieve Stateful Address Prefix>*1

<Off>، ‏<On>

<DHCP Option Settings>

<Acquire DNS Server Address>: <Off>، ‏<On>

<Acquire Domain Name>: <Off>، ‏<On>

<DNS Settings>*1

<Primary DNS Server Address>

<Secondary DNS Server Address>

<Use Same Host Name/Domain Name as IPv4>: <Off>، ‏<On>

<Host Name>: ‏Canon****** ("******" شش رقم آخر آدرس MAC را نشان می‌دهد.)

<Domain Name>: نام دامنه را وارد کنید.

<Perform DNS Dynamic Update>: <Off>، ‏<On>

　<Register Stateless Address>: <Off>، ‏<On>
　<Register Manual Address>: <Off>، ‏<On>
　<Register Stateful Address>: <Off>، ‏<On>

<DNS Server Address Settings
>

<Primary DNS Server>: آدرس IP را وارد کنید.

<Secondary DNS Server>: آدرس IP را وارد کنید.

<mDNS Settings>

<Use IPv4 mDNS>: <Off>، ‏<On>

<mDNS Name> (حداکثر 63 نویسه)

<Use IPv6 mDNS>: <Off>، ‏<On>

<Use Same mDNS Name as IPv4>: <Off>، ‏<On>

<mDNS Name> (حداکثر 63 نویسه)

<LPD Print Settings>

<Off>، ‏<On>

<Output LPD Banner Page>: <Off>، ‏<On>

<RX Timeout>*1: 1 تا 5 تا 60 (دقیقه.)

<RAW Print Settings>

<Off>، ‏<On>

<Bidirectional Comm.>: <Off>، ‏<On>

<RX Timeout>*1: 1 تا 5 تا 60 (دقیقه.)

<SNTP Settings>

<Use SNTP>: <Off>، ‏<On>

<Polling Interval>*1: 10 تا 1440 تا 2880 min.

<NTP Server Address>*1: (آدرس IP یا نام میزبان)

<FTP Print Settings>

<Use FTP Printing>: <Off>، ‏<On>

<User Name>: guest

<Password>: 7654321

<Use UTF-8 to Display FTP Print Job Name>

<Off>، ‏<On>

<WSD Settings>

<Use WSD Print>: <Off>، ‏<On>

<Use WSD Browsing>: <Off>، ‏<On>

<IPP Print Settings>

<Off>، ‏<On>

<Allow When Using TLS>: <Off>، ‏<On>

<Use Authentication>: <Off>، ‏<On>

<Multicast Discovery Settings>

<Response>: <Off>، ‏<On>

<Scope Name>

<Sleep Mode Notification Settings>*1

<Notify>: <Off>، ‏<On>

<Port Number>: 1 تا 11427 تا 65535

<Number of Routers to Traverse>: 0 تا 3 تا 254

<Notification Interval>: 60 تا 600 تا 65535 sec.

<Use HTTP>

<Off>، ‏<On>

<TLS Settings>*1

<Use>

<Certificate Details> (<Version>،‏ <Serial Number>،‏ <Signature Algorithm>،‏ <Issued To>،‏ <Validity Start Date>،‏ <Validity End Date>،‏ <Issuer>،‏ <Public Key>،‏ <Certificate Thumbprint>،‏ <Issued To (Alternate Name)>،‏ <Verify Certificate>)

<Key Usage> (نشان می‌دهد جفت کلید برای چه چیزی استفاده می‌شود)

<Maximum Version‎>: <TLS 1.0>، <TLS 1.1>، <TLS 1.2>، <TLS 1.3>

<Minimum Version‎>: <TLS 1.0>, <TLS 1.1>, <TLS 1.2>, <TLS 1.3>

 <AES-CBC (256-bit)>: <Off>، ‏<On>
 <AES-CBC (128-bit)>: <Off>، ‏<On>
 <AES-GCM (256-bit)>: <Off>، ‏<On>
 <AES-GCM (128-bit)>: <Off>، ‏<On>
 <3DES-CBC>: <Off>، ‏<On>
 <CHACHA20-POLY1305>: <Off>، ‏<On>

 <RSA>: <Off>، ‏<On>
 <ECDHE>: <Off>، ‏<On>
 <X25519>: <Off>، ‏<On>

 <RSA>: <Off>، ‏<On>
 <ECDSA>: <Off>، ‏<On>

 <SHA1>: <Off>، ‏<On>
 <SHA256>: <Off>، ‏<On>
 <SHA384>: <Off>، ‏<On>

<Proxy Settings>

<Use Proxy>: <Off>، ‏<On>

<Server Address> (آدرس IP یا FQDN)

<Port Number>: 1 تا 80 تا 65535

<Use Proxy within Same Domain>: <Off>، ‏<On>

<Authentication Set.>: ‏<Use Proxy Authentication>(<Off>،‏ <On>)،‏ <User Name> (حداکثر 24 نویسه)،‏ <Password> (حداکثر 24 نویسه)،‏ <Confirm> (حداکثر 24 نویسه)

<Confirm Auth Info When in Auth Mngt Mode>

<Off>، ‏<On>

<Use IPSec>

<Off>، ‏<On>

<Receive Non-Policy Packets>*1

<Allow>، ‏<Reject>

<IPSec Policy List>

<Register New IPSec Policy>، ‏<Delete>، ‏<Raise Priority>، ‏<Lower Priority>

‏<Policy Name> (حداکثر 24 نویسه)،‏ <Policy On/Off> (<Off>،‏ <On>)،‏ <Only Allow 256-bit for AES Key Length> (<Off>،‏ <On>)،‏ <Selector Settings>،‏ <IKE Settings>،‏ <IPSec Network Settings>

<Local Address Settings> (<All IP Addresses>، ‏<IPv4 Address>، ‏<IPv6 Address>، ‏<IPv4 Manual Settings>، ‏<IPv6 Manual Settings>)

<Remote Address Settings>(<All IP Addresses>، ‏<All IPv4 Addresses>، ‏<All IPv6 Addresses>، ‏<IPv4 Manual Settings>، ‏<IPv6 Manual Settings>)

<Port Settings> (<Specify by Port Number>، ‏<Specify by Service Name>)

<IKE Mode‎>: <Main>, <Aggressive>

<Validity‎>: 1 تا 480 تا 65535 min.

<Authentication Method>: <Pre-Shared Key Method> (<Shared Key Settings>)،‏ <Digital Signature Method> (<Key and Certificate>)

<Authentication/Encryption Algorithm> (<Auto>،‏ <Manual Settings>)

<Authentication/Encryption Algorithm>: <Manual Settings>

<Validity>

<Time>: <Off>، ‏<On>

<Validity>

<Size>: <Off>، ‏<On>

<Use PFS>: <Off>، ‏<On>

<Authentication/Encryption Algorithm>: <Auto>، ‏<Manual Settings>

<Authentication/Encryption Algorithm>: <Manual Settings> (<ESP>،‏ <ESP (AES-GCM)>،‏ <AH (SHA1)>)

تنظیمات <ESP>:

تنظیمات <ESP (AES-GCM)>: هیچکدام

تنظیمات <AH (SHA1)>: هیچکدام

<Connection Mode>: <
Transport> (فقط نمایشگر)

<TCP/IP Option Settings>*1

<Use Window Scale Option>: <Off>، ‏<On>

<MTU Size>: 600 تا 1500 bytes (600-1500)

<Use SNMPv1>

<Off>، ‏<On>

<Use Dedicated Community>: <Off>، ‏<On>

<MIB Access Permission>: <Read/Write>، ‏<Read Only>

<Use Community Name 1>: <Off>، ‏<On>

<MIB Access Permission>: <Read/Write>، ‏<Read Only>

<Community Name>: عمومی

<Use Community Name 2>: <Off>، ‏<On>

<MIB Access Permission>: <Read/Write>، ‏<Read Only>

<Community Name>: عمومی2

<Use SNMPv3>

<Off>، ‏<On>

<Use Administrator>: <Off>، ‏<On>

<User Name>: فقط نمایشگر
<MIB Access Permission>: فقط نمایشگر
<Security Settings>: فقط نمایشگر
<Authentication Algorithm>: فقط نمایشگر
<Encryption Algorithm>: فقط نمایشگر

<Use Same Password as for Authentication>: <Off>، ‏<On>

<Set/Change Password>: <Off>، ‏<On>
<Encryption Password>: کلمه عبور را وارد کنید.
<Confirm>: کلمه عبور را وارد کنید.

<User On/Off>: <Enable>، ‏<Disable>

<Register> (<User Name>, <MIB Access Permission> (<Read/Write>, <Read Only>), <Security Settings> (<Auth. Yes/Encrypt. Yes>, <Auth. Yes/Encrypt. No>, <Auth. No/Encrypt. No>), <Authentication Algorithm> (<MD5>, <SHA1>, <SHA2-224>, <SHA2-256>, <SHA2-384>, <SHA2-512>), <Authentication Password>, <Encryption Algorithm> (<DES>, <AES>), <Encryption Password>)

<Details/Edit> (<User Name>, <MIB Access Permission> (<Read/Write>, <Read Only>), <Security Settings> (<Auth. Yes/Encrypt. Yes>, <Auth. Yes/Encrypt. No>, <Auth. No/Encrypt. No>), <Authentication Algorithm> (<MD5>, <SHA1>, <SHA2-224>, <SHA2-256>, <SHA2-384>, <SHA2-512>), <Authentication Password>, <Encryption Algorithm> (<DES>, <AES>), <Encryption Password>)

<Delete>

<Get Printer Management Information from Host>*1

<Off>، ‏<On>

<Format Host Resources MIB to RFC2790>

<Off>، ‏<On>

<Dedicated Port Settings>

<Off>، ‏<On>

<Dedicated Port Authentication Method>

<Mode 1>، ‏<Mode 2>

<Use Spool Function>

<Off>، ‏<On>

<Receive in Parallel>

<Off>، ‏<On>

<Waiting Time for Connection at Startup>

0 تا 300 sec.

<Ethernet Driver Settings>

<Auto Detect>: <Off>، ‏<On>

<Current Transmission Speed>: فقط نمایشگر

<MAC Address>: فقط نمایشگر

<Use IEEE 802.1X>

<Off>، ‏<On>

<Login Name> *1

Login Name

<Verify Authentication Server Certificate>*1

<Off>، ‏<On>

<Verify Authentication Server Name
>*1

<Off>، ‏<On>

<Authentication Server Name>*1

Authentication Server Name

<Use TLS>*1

<Off>، ‏<On>

<Key and Certificate>*1

<Use>

<Certificate Details> (<Version>،‏ <Serial Number>،‏ <Signature Algorithm>،‏ <Issued To>،‏ <Validity Start Date>،‏ <Validity End Date>،‏ <Issuer>،‏ <Public Key>،‏ <Certificate Thumbprint>،‏ <Issued To (Alternate Name)>،‏ <Verify Certificate>)

<Key Usage> (کلید و گواهی)

<Use TTLS>*1

<Off>، ‏<On>

<Use PEAP>*1

<Off>، ‏<On>

<Use Login Name as User Name>*1

<Off>، ‏<On>،

<User Name> *1

نام کاربری که با تأیید اعتبار IEEE802.1X تأیید می شود

<Password>*1

کلمه عبور کاربری که با تأیید اعتبار IEEE802.1X تأیید می شود

<Outbound Filter>

<Use Filter>: <Off>، ‏<On>

<Default Policy>*1: <Allow>، ‏<Reject>

<Exception Addresses>*1: <Register New> (حداکثر 16 آدرس IPv4>‏،‏ <Delete>

<Inbound Filter>

<Use Filter>: <Off>، ‏<On>

<Default Policy>*1: <Allow>، ‏<Reject>

<Exception Addresses>*1: <Register New> (حداکثر 16 آدرس IPv4)‏، <Delete>

<IPv4 Address ICMP Settings>*1

<Always Allow Sending/Receiving Using ICMP>: <Off>، ‏<On>

<Outbound Filter>

<Use Filter>: <Off>، ‏<On>

<Default Policy>*1: <Allow>، ‏<Reject>

<Exception Addresses>*1: <Register New> (حداکثر 16 آدرس IPv4)،‏ <Delete>

<Inbound Filter>

<Use Filter>: <Off>، ‏<On>

<Default Policy>*1: <Allow>، ‏<Reject>

<Exception Addresses>*1: <Register New> (حداکثر 16 آدرس IPv4)،‏ <Delete>

<IPv6 Address ICMP Settings>*1

<Always Allow Sending/Receiving Using ICMP>: <Off>، ‏<On>

<Outbound Filter>

<Use Filter>: <Off>، ‏<On>

<Default Policy>*1: <Allow>، ‏<Reject>

<Exception Addresses>*1: <Add> (تا 100 آدرس Mac)،‏ <Edit>،‏ <Delete>

<Inbound Filter>

<Use Filter>: <Off>، ‏<On>

<Default Policy>*1: <Allow>، ‏<Reject>

<Exception Addresses>*1: <Add> (تا 100 آدرس Mac)،‏ <Edit>،‏ <Delete>

<IP Address Block Log>

<Date/Time>، ‏<Type>، ‏<IP Address>، ‏<Port Number>، ‏<Result>

<Use Mopria>

<Off>، ‏<On>

<Use AirPrint>

<Off>، ‏<On>

<Display Errors for AirPrint>

<Off>، ‏<On>

<Position Information>

<Auto Acquire>

<Latitude>: عرض جغرافیایی را مشخص کنید.

<Longitude>: طول جغرافیایی را مشخص کنید.

<Basic Settings>

<Use Universal Print‎>

<Off>، ‏<On>

<Verify Server Certificate‎>

<Off>، ‏<On>

<Add CN to Verification Items‎>

<Off>، ‏<On>

<Printer Name‎>

OIP_PRINTER

<Application ID‎>

f9fc375cc7ba-4e5c-b213-23affd792cc1

<Azure Active Directory Authentication URL‎>

https://login.microsoftonline.com/organizations/oauth2/v2.0

<Azure Active Directory Registration URL‎>

https://register.print.microsoft.com/api/v1.0/register

<Registration Status‎>

<URL for Registration‎>

<Code for Registration‎>

<Select Interface>

<Wired LAN>, <Wireless LAN>, <Wired LAN + Wired LAN>, <Wired LAN + Wireless LAN>

<WPS Push Button Mode>

<WPS PIN Code Mode>

<SSID Settings>

<Select Access Point>: از لیست انتخاب کنید.

تأیید اعتبار WEP: (<WEP Key (5-26 Char.)>: کلید WEP را وارد کنید

رمزگذاری WPA/WPA2-PSK: <PSK (8-64 Char.)>: عبارت عبور WPA/WPA2-PSK را وارد کنید

<Enter Manually>: SSID را وارد کنید

<Security Settings>: <None>، ‏<WEP>، ‏<WPA/WPA2-PSK>، ‏<WPA/WPA2-EAP>

<Power Save Mode>

<Off>، ‏<On>

<Connection Information>

<MAC Address>: فقط نمایشگر
<Wireless LAN Status>: فقط نمایشگر
<Latest Error Information>: فقط نمایشگر
<Channel>: فقط نمایشگر
<SSID Settings>: فقط نمایشگر
<Security Settings>: فقط نمایشگر
<Power Save Mode>: فقط نمایشگر

<Use Direct Connection>

<Off>، ‏<On>

<Direct Connection Type>

<Access Point Mode>، ‏<Wi-Fi Direct>

<Device Name for Wi-Fi Direct>

<Dev Name(Wi-Fi Direct)>: Device Name

<Time Until Direct Connection Termination>

0 = هیچ کدام،‏ 1 تا 30 تا 60 دقیقه.

<Access Point Mode Settings>

<Use Personal SSID and Network Key>*1: <Off>، ‏<On>

<Use Custom SSID>: <Off>، ‏<On>

<SSID>: SSID را وارد کنید

<Use Custom Network Key>: <Off>، ‏<On>

<Network Key>: کلید شبکه را وارد کنید

<Keep Enabled If SSID/Net. Key Specified>

<Off>، ‏<On>

<Direct Connection IP Address Settings>

<Timeout After Logging in to Remote UI>

15 تا 150 دقیقه

Settings/Registration Basic Information

<IP Address Settings>

<Auto Acquire>: <DHCP>، ‏<Off>

<Manually Acquire>
 <IP Address>: <0.0.0.0>
 <Subnet Mask>: <0.0.0.0>
 <Gateway Address>: <0.0.0.0>

<Check Settings>: فقط نمایشگر

<Priority Line for Comm w/Mobile Devices>

<Main Line>، ‏<Sub Line>

<Ethernet Driver Settings>

<Auto Detect>: <Off>، ‏<On>

<Current Transmission Speed>: فقط نمایشگر

<MAC Address‎>: فقط نمایشگر

<Outbound Filter‎>

<Use Filter>: <Off>، ‏<On>

<Default Policy>*1: <Allow>، ‏<Reject>

<Exception Addresses>*1: <Register New> (حداکثر 16 آدرس IPv4)،‏ <Delete>

<Inbound Filter‎>

<Use Filter>: <Off>، ‏<On>

<Default Policy>*1: <Allow>، ‏<Reject>

<Exception Addresses>*1: <Register New> (حداکثر 16 آدرس IPv4)،‏ <Delete>

<DNS Server Address Settings‎>

<Primary DNS Server‎>

<Secondary DNS Server‎>

<Proxy Settings‎>

<Use Proxy>: <Off>، ‏<On>

<Server Address> (آدرس IP یا FQDN)

<Port Number‎>: 1 تا 80 تا 65535

<Use Proxy Auth.>: <Off>، ‏<On>

<User Name> (حداکثر 24 نویسه)

<Password> (حداکثر 24 نویسه:)
<Confirm> (حداکثر 24 نویسه)

<Static Routing Settings‎>

<Use Static Routing>: <Off>، ‏<On>

<Register>،‏ <Delete>*1

<Address>(<0.0.0.0>)،‏ <Prefix Length>(1 تا 32)،‏ <Gateway Address>(<0.0.0.0>)