<Display Settings>
This section describes the display settings.
<Button Display Order on Home Screen>
<Set>
<Preferences>
<Display Settings>
You can rearrange the order in which the buttons appear on the <Home> screen.
Customizing the <Home> Screen<Default Screen After Startup/Restoration>
<Set>
<Preferences>
<Display Settings>
You can set the default screen displayed at startup/restoration.
<Language>
<Set>
<Preferences>
<Display Settings>
You can select the language displayed on the display.
|
Some messages may not be displayed properly in the selected language. In this case, restart the machine. Some messages may not change even after the machine is restarted. |
<Millimeter/Inch Entry Switch>
<Set>
<Preferences>
<Display Settings>
You can set whether to enter numeric values in millimeters or inches on the various numeric entry screens.
<Confirm When Loading Paper in Drawer>
<Set>
<Preferences>
<Display Settings>
You can set whether to display a screen prompting the user to check the paper settings when the paper drawer is inserted into the machine.
|
The screen prompting the user to check the paper settings is not displayed in the following cases. When paper is loaded because it has run out during a job When a paper jam is removed When a screen for executing, canceling, or confirming jobs is displayed When the paper is set in <Paper Settings> on the <Home> screen
|
<IP Address Display Settings>
<Set>
<Preferences>
<Display Settings>
You can set whether to display the IP address on the <Status Monitor> screen.
|
This setting is only valid when <Use IPv4> is set to <On>. |
<Display Mobile Portal>
<Set>
<Preferences>
<Display Settings>
You can set whether to display <Mobile Portal> on the <Home> screen.
<Timing of Toner Cart. Replacement Notif.>
<Set>
<Preferences>
<Display Settings>
You can set the amount of toner remaining in the toner cartridge for displaying the restock toner message.
<Waste Toner Container Replacement Notif.>
<Set>
<Preferences>
<Display Settings>
You can set whether to display a message prompting the user to replace the waste toner container.