Setting Sounds
The machine produces sounds in a variety of situations, such as when a button on the display is pressed or when a paper jam or error occurs. You can set on/off of the sound of each of these sounds individually.
Adjusting the sound volume
1
Press the 
(
) key.
() key.2
Select a setting.
Setting | Description | Procedure |
<Entry Tone> | Confirmation sound each time a key on the operation panel or button on the display is pressed | Select <On> (produce a tone) or <Off> (not produce a tone). |
<Invalid Entry Tone> | Sound produced when an invalid key operation is performed, such as when you enter a number outside the valid setting range | |
<Restock Supplies Tone> | Sound produced when a toner cartridge is almost empty | |
<Warning Tone> | Sound produced when a paper jam or other error occurs | |
<Job Done Tone> | Sound produced when an operation such as copying or scanning is complete | |
<Energy Saver Alert> | Sound produced when the machine enters or exits sleep mode | |
<Original in Feeder Detection Tone> | Sound produced when an original is loaded in the feeder | |
<Non-Empty Toner Replaced Tone> | Sound produced when a non-empty toner cartridge is removed |
3
Select <Apply>.