Checking Status and Log for Scanned Originals
You can check the status and log for scanned originals sent directly from the machine. You can also check the status and log for received I-Fax documents.
|
When <Display Job Log> is set to <Off>, you cannot check the communication logs. <Display Job Log> |
1
Select <Status Monitor>.
2
Select <TX Job> or <RX Job>.
3
Check the statuses and communication logs for sent and received documents.
To check the statuses for sent and received documents
1 | Select the document whose status you want to check in the <TX Job Status> or <RX Job Status> tab.  Displays detailed information about the document. If you specified multiple destinations, the number of specified destinations is displayed on the screen. To check the details of specified multiple destinations, select <Destination>. |
To check the logs for sent and received documents
1 | Select the document whose log you want to check in the <TX Job Log> or <RX Job Log> tab. <OK> is displayed when a document was sent or received successfully, and <Error> is displayed when a document failed to be sent or received because it was canceled or there was some error.  Displays detailed information about the document.  When a three-digit number is shown in the case of <Error> This number represents an error code. Countermeasures for Each Error Code Registering the destination of the sent document to the Address Book For a document sent to a destination not registered in the Address Book, you can register that destination to the Address Book by selecting <Regst to Add Book> on the details screen. |