Configuring the Preferences
This section describes the method for configuring the preferences of this software.
1.
Log in to this software as the system manager.
2.
Select the [System] menu > [Preferences].
3.
Configure the required settings on the [Preferences] page.
You can switch the display using the drop-down list on the top of the [Preferences] page.
NOTE |
This setting is optional. Set the items to use. |
[E-Mail Settings]
Refer to the following settings of iW Management Console V3.x.
[Configuration] > [Common Settings] > [Communications Settings]
Enter the source address in [Sender E-Mail Address].
Enter the SMTP server address in [SMTP Server Address].
Enter the port number used for communicating with the SMTP server in [Port Number].
To use SSL/TLS when communicating with the SMTP server, select [Use TLS].
To use user authentication when communicating with the SMTP server, select [Use user authentication], and enter the authentication information in [User Name] and [Password].
Click [Save].
To send a test e-mail, click [Send Test E-Mail].
A test e-mail is sent to the e-mail address of the user operating this screen.
[LDAP Server Settings]
Configure the following settings here.
Settings for logging in to this software with Integrated Windows Authentication
Settings for logging in to this software with LDAP authentication
For information on the setting method, see the following.
"Configuring Integrated Windows Authentication" in the User's Guide
"Configuring LDAP Authentication" in the User's Guide
[Password Policy]
Select the password policy to apply.
Click [Save].
IMPORTANT |
In order to apply the policy set here to registered passwords, it is necessary to manually reset the passwords. |
[Device Group Settings]
If you selected [Use tree view] in [Display Settings], select the character to use for separating levels in [Delimiter Character].
If [Use list view] was set in [Display Settings], multiple levels can be created at the same time in the [Devices] menu > [Device Groups]. However, if levels are created using this method, devices can only be added to the last level. Devices cannot be added to the higher levels.
Click [Save].
[Data Retention Period]
Specify the period to retain the history of executed tasks.
Refer to the following settings of iW Management Console V3.x.
[Task] > [List] > [Task Log Retention Settings]
Specify the number of days in [Retain Task History (in Days)].
Specify the number of days in [Retain User Operation Log (in Days)].
Click [Apply].
[Online Manual Settings]
Select the target region for the manual displayed when [Online Manual] is selected in the [Help] menu.