Setting a Remote UI PIN

You can set a PIN for access to the Remote UI. All users use a common PIN.

When Department ID Management is enabled, setting here is not required. Setting the Department ID Management

Select <Menu> in the Home screen. Home Screen

Select <Management Settings>.

If the login screen appears, enter the correct ID and PIN. Logging in to the Machine

Select <Remote UI Settings/Update Firmware>

<Restrict Access>.

Select <On>.

Specify the Remote UI Access PIN.

Enter a PIN, and select <Apply>.

The Confirm screen is displayed. Enter the PIN once again to confirm.

You cannot register a PIN that consists only of zeros, such as "00" or "0000000."


Do not forget your PIN. If you forget your PIN, use the procedure above to set a new PIN.


If <Management Settings> are initialized The Remote UI Access PIN is also initialized. After an initialization, reset the PIN. <Initialize Menu>