Configuring Ethernet Settings

 
Ethernet is a standard for communicating data in a local area network (LAN). You can set the communication mode and the Ethernet type. In general, the machine can be used without changing the defaults (<Ethernet Driver Settings>), but you can change these settings to suit your network environment.
1
Select <Menu> in the Home screen. Home Screen
2
Select <Preferences>  <Network>.
If the login screen appears, enter the correct ID and PIN. Logging in to the Machine
3
Select <Ethernet Driver Settings>.
4
Select whether to configure Ethernet settings automatically or manually.
If auto-detection is enabled, the machine detects and automatically sets the Ethernet communication mode and the type that can be used.
Configuring Ethernet settings automatically
Select <On> in <Auto Detect>.
Configuring Ethernet settings manually
1
Select <Off> in <Auto Detect>.
2
<Communication Mode>  select the communication mode.
<Half Duplex>
Alternately sends and receives communication data. Select when the machine is connected to a networking device using half duplex.
<Full Duplex>
Simultaneously sends and receives communication data. Use this setting for most environments.
3
<Ethernet Type>  select the Ethernet type.
4
Select <Apply>.
5
Select <OK>.
6
Restart the machine. Restarting the Machine
8051-010