Operation Panel

You can view the operation and error statuses of this machine, the amount remaining in the toner cartridges, and other conditions. Basic Screens

Press to display the Home screen, which provides access to the setting menu and functions such as Memory Media Print and Secure Print. Home Screen

Press to return to the previous screen. If you press this key when specifying settings, for example, the settings are not applied and the display returns to the previous screen.

Press to enter numbers and text. Entering Text

Press to switch the type of text that is entered.

Blinks while an operation is being performed, such as data transmission or printing. Lights up when there are documents waiting to be processed.

Blinks or lights up when an error such as a paper jam occurs.

Press to put the machine into sleep mode. The key lights up green when the machine is in sleep mode. Press the key again to exit sleep mode. Entering Sleep Mode

Press to check the printing status, to view the usage history, or to view the network settings such as the IP address of the machine. You can also check the status of the machine, such as the remaining amount of paper and the amount remaining in the toner cartridges, or whether any errors occurred. <Status Monitor> Screen

Press after entering the ID and PIN to log on when Department ID Management is enabled. After you finish using the machine, press this key again to log off. Logging in to the Machine

Press to delete the entered numbers and text.

Press to cancel printing and other operations.

Press to enter symbols such as "@" or "/".

When specifying settings, press to return to the previous screen. When entering numbers, press to move the cursor to the left.

When specifying settings, press to select the item immediately above the currently selected item. When changing setting values, press to increase a value.

When specifying settings, press to proceed to the next screen. When entering numbers, press to move the cursor to the right.

When specifying settings, press to select the item immediately below the currently selected item. When changing setting values, press to decrease a value.

Press to apply settings or specified details.