Internet Fax (I-Fax) is a function that attaches a file to an e-mail as a TIFF image file and transfers it. This machine can receive I-Faxes and print them. I-Faxes can be received automatically at the specified intervals, and also received manually.
Configure the I-Fax RX setting from a computer, and the print settings from the operation panel of this machine.
For more information about the basic operations to be performed when setting the machine from the Remote UI, see Setting Up Menu Options from Remote UI.
From a Computer
1
Start the Remote UI and log in to System Manager Mode. Starting Remote UI
2
Click [Settings/Registration] on the Portal page. Remote UI Screen
[POP Server] Enter alphanumeric characters as the POP3 server name or IP address for receiving I-Faxes.
[User Name] Enter alphanumeric characters as the user name for the specified e-mail account.
[Set/Change Password] To set or change the password, select the check box and enter alphanumeric characters in [Password].
[POP RX] Select the check box to receive I-Faxes.
[POP Interval] This sets the interval (in minutes) used for automatically connecting to the POP3 server. If there are any I-Fax documents on the server, they are automatically received and printed.
[Use APOP Authentication] Select the check box to use APOP to encrypt the password during the authentication process.
[Use TLS for POP] Select the check box to encrypt communication with the POP3 server using TLS. Select the check box for [Verify Certificate] or [Add CN to Verification Items] depending on your needs.
Depending on the network you are using, you may need to change the POP3 port setting (Changing Port Numbers). For more information, contact your Internet service provider or Network Administrator.
Receiving I-Faxes Manually
If the I-Fax RX setting is completely configured from the POP3 server, you can manually receive I-Faxes and print them. When you want to connect to the server before receiving I-Faxes automatically, or when the machine is configured so that it does not receive I-Faxes automatically, use the method below to receive I-Faxes manually.
1
Press .
2
Select <RX Job>.
3
Select <Check E-Mail RX>.
Connect to the POP3 server. If there is a document on the server, printing begins.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.
[E-Mail/I-Fax Settings].
Specifying the setting for 2-sided printing
.
