Replacing the Toner Cartridge

When toner starts running low or has run out, a message is displayed prompting you to prepare a new toner cartridge or perform toner cartridge replacement. Prepare a new toner cartridge or perform toner cartridge replacement according to the displayed message.
For details about each message, see Countermeasures for Each Message.
For information on the product numbers for toner cartridges, see Consumables.
You can check the current amount of toner remaining. Checking the Remaining Toner Level

Procedure for Replacing the Toner Cartridge

1
Open the front cover.
2
Pull out the toner cartridge.
Make sure to avoid applying shocks to the toner cartridge by hitting it against something, etc. Doing so may cause the toner to leak.
3
Remove the new toner cartridge from its box.
4
With the white part of the new toner cartridge facing up, shake the toner cartridge up and down approximately 10 times.
Shaking the toner cartridge evens out the toner inside.
An error message is displayed if you install the toner cartridge before the toner inside has evened out. Follow the instructions on the screen and perform the procedure again.
Do not have the white part of the toner cartridge face down. Doing so may prevent the toner from being supplied properly.
5
Install the new toner cartridge.
With the flat surface of the toner cartridge facing down, slide the toner cartridge as far as it will go.
6
Close the front cover.
If printing was interrupted because toner ran out, it will automatically resume when you replace the toner cartridge.
If the gradation and density of printing differ after replacing the toner cartridge, perform adjustment.
9A9E-01J