Setting Up

After installing the machine, configure the required settings to enable use of the functions by performing the following steps.
Steps 1 to 3 are the machine settings.
Step 4 is the setting for using the machine from a computer. Configure this setting for each computer using the machine.
Step 1
When you turn ON the machine for the first time, the screen (Setup Guide) for setting the items required for using the machine is displayed. Configure the settings by following the instructions on the screen.
Step 2
Configure the network settings not included in the Setup Guide.
If you did not connect to the network using the Setup Guide, do that during this step.
Step 3
Set the items required to perform fax operations by following the instructions on the screen.
Step 4
Install the software required to use the machine and any printer and fax drivers on your computer.

See Also

Implementing Measures to Prevent Unauthorized Access
It is important to provide measures against security risks when using the machine in a network environment. Check examples of measures that you can take with the machine.
Measures to Prevent Unauthorized Access
Checking Available Functions
The functions available on the machine vary depending on the model. Check the functions that are available on your model.
Supported Functions and Options
Configuring the Settings Required to Use the Functions of the Machine
Additional settings may be required depending on your model. For details about the settings required for each function, see the following:
Printing Preparations
Preparations for Scanning
Preparations for Linking with Mobile Devices
Importing Settings Data from Another Machine
You can share settings data with other machines to save time on registering and configuring the settings. You can export data from another machine of the same model to a computer and import that data to the machine so as to share the settings.
Importing and Exporting the Address Book and Settings
95UE-017