Cleaning the Fixing Assembly
If the printout is smudged, the fixing assembly may be dirty. In this case, you can clean the fixing assembly using paper.
The fixing assembly cannot be cleaned when data is waiting to be printed or a toner cartridge has reached the end of its lifetime.
The fixing assembly cannot be cleaned when data is waiting to be printed or a toner cartridge has reached the end of its lifetime.
Required Preparations |
Check that there is enough amount of toner remaining in the toner cartridges. Checking the Remaining Amount of Consumables |
1
On the operation panel, press [Menu] in the [Home] screen. [Home] Screen
2
Press [Adjustment/Maintenance] 
[Maintenance] [Clean Fixing Assembly].
[Maintenance] [Clean Fixing Assembly].The available paper sizes and types are displayed on the confirmation screen.
3
Check that available paper is loaded, and then press [OK] [Start].
[Start].The paper is fed to the machine, and cleaning starts.
When cleaning is completed, a sheet of paper with a printed image (pattern) is output.
When cleaning is completed, a sheet of paper with a printed image (pattern) is output.