Configure the settings below if they have not been configured.
The machine must be restarted to apply the settings.
The Machine Connected via WSD Port Is Not Displayed During Driver Installation
Troubleshoot by checking the items below.
Check the Settings of the Machine.
WSD Printing and Multicast Discovery Settings
Log in to Remote UI in System Manager Mode  [Settings/Registration] [Network Settings] [WSD Settings] [Edit] select the [Use WSD Printing] and [Use Multicast Discovery] checkboxes [OK] restart the machine. |
On the operation panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the settings. [WSD Settings]
Selecting the Page Description Language
Select the page description language (PDL) of the installed driver.
Log in to Remote UI in System Manager Mode [Settings/Registration] [Printer Settings] [PDL Selection (Plug and Play)] [Edit] select the PDL in [Network] [OK] restart the machine. |
On the operation panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings. [Network]
Check the OS Network Settings.
Configure the settings below if they have not been configured.
In Windows, click [  ] (Start) [ ] (Settings) [Network & Internet] [Status] [Change connection properties] [Network profile] [Private] |
Check Whether the Driver Is Installed.
Use the following procedure to check whether the driver of the machine is displayed.
In Windows, click [ ] (Start) [] (Settings) [Devices] [Printers & scanners] check whether the driver is displayed. |
If the driver is displayed, it is installed. In this case, uninstall the driver, and then reinstall it.
For details about uninstalling and installing drivers, see the driver manual at the online manual site.
https://oip.manual.canon/
For details about uninstalling and installing drivers, see the driver manual at the online manual site.
https://oip.manual.canon/