Distributing Device Setting Values to Printers

This section describes the method for distributing device setting values to printers.
IMPORTANT
There are several cautions to follow when handling device setting values. Confirm the following in advance.

Preparing to Distribute Device Setting Values

1.
Configure the settings on the destination printer side.
For details, see the following.
2.
Upload the device setting value data to distribute to this software.
For details, see the following.
3.
Back up the device setting values from the target printers for distribution.
For details, see the following.

Distributing Device Setting Values

NOTE
The printers are automatically restarted only if a restart is required after distributing the device setting value data to the printers.
1.
Select the [Tasks] menu > [Task List].
2.
Click [Create].
3.
Select [[Device Configuration] Distribute] from the list.
4.
Configure the task on the [Scheduled] tab and the [Targets] tab.
For details, see the following.
5.
On the [Task-Specific Settings] tab, select the device setting value data to distribute from the list in [Device Setting Values Data to Distribute].
6.
Click [Add].
You can check the information of the registered tasks by selecting the [Tasks] menu > [Task List].
For details, see the following.
You can check the information of executing or completed tasks by selecting the [Tasks] menu > [History].
For details, see the following.