Select the paper source with the loaded usable paper, and press <Start Printing>.
A test page is printed.
4
Select the current state of the fold position and set the shift width, and press <Next>.
Check the current state of the fold position and the shift width on the test page.
5
Select the current state of the staple position and set the shift width.
Check the current state of the staple position and the shift width on the test page.
6
Press <OK>.
7
Press <Start Printing> to print the test page again, and check the adjustment results.
To end the adjustment without printing the test page, press <Close>.
8
Press <Done>.
If further adjustment is needed, press <Re-Adjust> and repeat Steps 3 to 6.
9
Press <OK>.
Adding Operations to Adjust the Saddle Stitch Fold Position and Staple Position
Adjust the saddle stitch fold position and staple position so that they are at the center of the paper. Print a test page, check the current state of the fold position and the shift width on the test page, and then perform adjustment.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.