Specifying a PS Password
You can specify the password that restricts the use of the control command prepared by the PS printer.
NOTE |
[SystemParams Password] is a password that allows changes to the system parameter, and [StartJob Password] is a password that allows startjob, exitserver operator to perform. For more information, check PostScript language specifications. |
1.
Press
/
(Settings/Register).
2.
Press [Function Settings] → [Printer] → [PS Password Settings].
3.
Press [SystemParams Password] or [StartJob Password] → enter each password.
If [StartJob Password] is set but [SystemParams Password] is not set, password check will not be performed while performing startjob, exitserver operator.
Press [OK] → enter the same password to confirm that you have not incorrectly entered the password.
4.
Press [OK].