Adjusting Paper Alignment
If the paper is not output in the intended position, perform fine adjustment of the paper output position.
|
Tray A and Tray B can be set when the Staple Finisher-AG/Booklet Finisher-AG is attached. Staple Finisher-AG/Booklet Finisher-AG/Puncher Unit-BT/Puncher Unit-BU/Booklet Trimmer-G Tray C can be set when the Staple Finisher-AC/Booklet Finisher-AC and Finisher Jogger Kit-A are attached. Staple Finisher-AC/Booklet Finisher-AC/2/4 Hole Puncher Unit-A/2/4 Hole Puncher Unit-A |
1
Press 
(Settings/Registration) 
<Adjustment/Maintenance> <Adjust Action> <Finisher Tray A Alignment Adjustment>, <Finisher Tray B Alignment Adjustment> or <Finisher Tray C Alignment Adjustment>.
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action> <Finisher Tray A Alignment Adjustment>, <Finisher Tray B Alignment Adjustment> or <Finisher Tray C Alignment Adjustment>.If you want to adjust the paper output position when using the staple mode with the Staple Finisher-AG/Booklet Finisher-AG attached, select <Alignment Adjustment When Stapling>.
2
Adjust the paper output position.
3
Press <OK>.