Entering Sleep Mode
The sleep mode function reduces power consumption by temporarily disabling some internal operations of the machine. You can put the machine into sleep mode by pressing 
(Energy Saver) on the screen. When the machine is in the sleep mode, the touch panel display turns off.
(Energy Saver) on the screen. When the machine is in the sleep mode, the touch panel display turns off.If the machine is in the Sleep mode, you may be unable to open the paper deck. In this event, reactivate the machine and then press the open button on the "POD Deck-E"/"Secondary POD Deck-E." |
 |
The machine may not enter sleep mode depending on the machine's operation status and conditions. The Processing/Data indicator flashes or maintains a steady green light even when the machine enters the Sleep mode. |
Exiting Sleep Mode
If you touch the touch panel display, the machine exits sleep mode.
|
The machine exits the sleep mode when one of the following operations is performed: When a cover on the machine is opened/closed After the machine exits the sleep mode, it may take time until the machine is ready to be operated. |
When You Want to Set the Auto Sleep Timer
You can use the <Auto Sleep Time> setting to automatically put the machine into sleep mode. If you want to change the amount of time that elapses before the machine enters auto sleep mode, follow the procedure below.
(Settings/Registration) 
<Preferences> <Timer/Energy Settings> <Auto Sleep Time> 
or 
to set the amount of time that elapses before the machine automatically enters sleep mode <OK>. |
You can set the time range to automatically enter sleep mode by the day of the week. <Auto Sleep Weekly Timer> |
Energy Consumption in Sleep Mode
You can set the amount of energy that the machine consumes when it is in sleep mode. Follow the procedure below to set the amount of energy consumed in sleep mode.
(Settings/Registration) <Preferences> <Timer/Energy Settings> set <Sleep Mode Energy Use> to <Low> or <High>.