Sensing Unit-B

Automatic Adjustment of the Image Position
For Periodic Adjustment
Paper Size:
All paper sizes supported by the engine
Paper Type:
Thin, Plain, Recycled, Color*1, Thick, Coated, Embossed*2, Translucent*1, Label*3, Pre-punched*4, Synthetic
For Adjustment by Printing Markers Over Parts of User's Images
Paper Size:
All paper sizes supported by the engine
Paper Type:
Thin, Plain, Recycled, Color*1, Thick, Coated, Embossed*2, Translucent*1, Label*3
Margins required for printing registration adjustment marks:
Cross track direction: 3/8" (9.21 mm)(1/8" (3.5 mm)(Print Margin) + 1/4" (4.71 mm)(Registration Adjustment Mark) + 0.04" (1 mm)(White Area))
Paper feed direction: 3/8" (9.5 mm)(1/8" (4.0 mm)(Print Margin) + 1/4" (4.5 mm)(Registration Adjustment Mark) + 0.04" (1 mm)(White Area))
For Adjustment by Inserting Adjustment Pages
Paper Size:
All paper sizes supported by the engine
Paper Type:
Thin, Plain, Recycled, Color*1, Thick, Coated, Embossed*2, Translucent*1, Label*3, Pre-punched*4, Synthetic
Interval for Inserting:
50 pages to 9,999 pages (Default: 1,000 pages), Common counter with gradation adjustment
Specified for each media
Number of Insertable Sheets: 3 sheets
Shading Correction
Paper Size
12 5/8" x 17 11/16", A3, 13" x 19", 12" x 18", 11" x 17", 8K
Paper Type
Thin, Plain, Thick, Coated
Adjustment of the Secondary Transfer Voltage
Paper Size
7 1/8" x 8 1/4" (182 mm x 210 mm) to 13" x 30" (330.2 mm x 762.0 mm)
Paper Type
Thin, Plain, Recycled, Thick, Coated, Embossed, Label*5, Synthetic
No Adjustment (Through Path)
Paper Size
All paper sizes that can be supported by the engine
Paper Type
All paper types that can be supported by the engine
Sample Tray Capacity
250 sheets (80 g/m², 20 lb bond)
Height: up to 1 1/8" (27.5 mm), 1 sheet for paper over 30" (762 mm)
Power Source
100-240 V AC, 50/60 Hz, 2.5 A
Maximum Power Consumption
500 W
Dimensions (W x D x H)
20 1/4" x 29 1/2" x 48 3/8" (515 mm x 750 mm x 1,228 mm)*6
Weight
Approximately 221.6 lb (100.5 kg)
*1 Adjustment may not be possible depending on the base color of the paper/film.
*2 Adjustment may not be possible if the emboss is deep.
*3 Adjustment marks cannot be printed on the perforation part.
*4 Adjustment marks cannot be printed on the pre-punched part.
*5 An adjustment chart cannot be printed on the perforation part.
*6 There will be a 1/8" (5 mm) gap in the width direction when connected to the main unit or other optional equipment.
AE9R-018