Fixing the Paper Size and Type to Use with the Multi-Purpose Tray (Optional)
If you always use the same paper size and type with the multi-purpose tray, it is recommended that you fix the paper size and type settings for the multi-purpose tray. This is convenient because you can save the time and labor to make settings each time you load paper in the multi-purpose tray.
This mode can be set when the Stack Bypass-D are attached. Stack Bypass-D
1
Press 
(Settings/Registration).
(Settings/Registration).2
Press <Preferences> 
<Paper Settings> <Multi-Purpose Tray Defaults>.
<Paper Settings> <Multi-Purpose Tray Defaults>.3
Press <Use Preset> <Register>.
<Register>.4
Select the paper type and press <Next>.
5
Select the paper size.
When registering standard size paper
1 | Select the standard size paper. |
2 | Press <OK>. |
When registering custom size paper
1 | Press <Custom Size>. |
2 | Specify the length of the <X> side and <Y> side. |
Press <X> or <Y> to enter the length of each side using the numeric keys.  If you register the paper size you use frequently on buttons <S1> to <S5>, you can call them up with one touch. Registering Free Size Paper (Custom Size Paper) | |
3 | Press <OK> <OK>. |
When registering envelopes
1 | Press <Envelope>. |
2 | Select the type of envelopes.  To register a custom size envelope, press <Custom> <Next> and press <X> or <Y> to specify the side, then use the numeric keys to enter the length of the specified side. |
3 | Press <OK> <OK>. |
6
Press <OK>.
7
Press <Close>.