Other Finishing Functions
 | Installing options enables you to use other finishing functions. Note that the available functions may differ depending on your model and the installed options. Optional Equipment |
Rotate 90 Degrees
You can output each set of paper in alternating portrait and landscape orientation.
Hole Punch
You can make punch holes for filing. You can set the punch position (left/right) or select Saddle Punch.
Z-Fold
You can fold the right half of the paper into three sections.
If you specify the Z-Fold mode with the Staple mode, and the number of sheets that are Z-folded exceeds 10, the prints will be collated, but not stapled.
C-Fold
You can divide the paper into three sections so that it folds in the shape of a C.
If you want the printed side to be folded inside when printing only on one side of paper, select <Face Up (Reverse Order)> for <Face Up/Face Down>.
Half Fold
You can fold each sheet of paper in half.
Accordion Z-Fold
You can divide the paper into three sections so that it folds in the shape of a Z.
If you want the printed side to be folded inside when printing only on one side of paper, select <Face Up (Reverse Order)> for <Face Up/Face Down>.
Saddle Fold
Using the booklet finisher, you can fold the output sheets in half. You can specify how many sheets to fold together and which page to start printing on.
Double Parallel Fold
You can fold the paper in half and then in half once more.
If you want the printed side to be folded inside when printing only on one side of paper, select <Face Up (Reverse Order)> for <Face Up/Face Down>.
 |
Depending on the paper type, you cannot use finishing functions. Hardware Specifications When configuring settings in <Access Stored Files>The finishing function can be used only when you are printing a PDF/XPS file or a file stored in the Mail Box. Z-Fold, C-Fold, Saddle Fold, and Double Parallel Fold can be set except when printing from Advanced Space, memory media, or the network. |