Finishing by Collating/Grouping

 
When copying two copies or more from the feeder, you can select collating or grouping for the order of printouts. Select "Collate" to print in sequential page order. Select "Group" to print bundles of each page, as in 10 sheets for the first page, 10 sheets for the second page, and so forth.
1
Place the original. Placing Originals
2
Press <Copy>. <Home> Screen
3
Press <Options> on the Copy Basic Features screen. Copy Basic Features Screen
4
Press <Finishing>.
5
Select the output destination and press <Next>.
This screen is only displayed when both the finisher and the "High Capacity Stacker-J" are attached.
6
Press <Collate (Page Order)> or <Group (Same Pages)>.
When the Output Destination Is Set to the Finisher
When the Output Destination is set to the Stack Area of the Stacker
If you select <Stacker>, select the output destination from the drop-down list.
7
Set <Offset> as necessary.
If you do not want to use offset (a function to shift the paper output position), press .
If you selected <Collate (Page Order)>, specify how many copies to be printed in each position using the numeric keys.
8
Press <OK>  <Close>.
9
Press  (Start).
Copying starts.
Depending on finishing functions, the installation of optional devices is needed. Optional Equipment
Depending on the paper type, you cannot use finishing functions. Hardware Specifications
When placing an original on the platen glass
Pressing <Options>  <Job Build> on the Copy Basic Features screen enables you to use the Collate/Group function even if the original is placed on the platen glass.
Insert a job separator between each page during a group output
If you select <Group (Same Pages)>, you can insert a job separator between each group. For more information, see <Job Separator Between Groups>. <Job Separator Between Groups>
When configuring settings in <Access Stored Files>
The finishing function can be used only when you are printing a PDF/XPS file or a file stored in the Mail Box.
A724-0AS