<Management Settings> <Security Settings> <System Verification Settings><Security Settings>
You can configure settings related to system modification.
<Verify System at Startup>
<Set> <Management Settings> <Security Settings> <System Verification Settings>
<Management Settings> <Security Settings> <System Verification Settings>You can set the machine to verify the integrity of the firmware and applications installed in the machine during startup.
 |
This function restarts the machine not only when the setting is changed from <Off> to <On> but also when <Apply> is selected without changing the setting from <On>. To avoid restarting the machine without changing the setting from <On>, select <No> on the confirmation screen and then navigate from the screen for this function. |
 | ||||||
When this function is set to <On>, startup takes longer than when it is set to <Off> because system verification is performed. The following events and results are recorded to the device management log. Managing the Logs
If an error code is displayed on the screen when the machine is started with this setting set to <On>, contact your dealer or service representative. |
<McAfee Embedded Control>
<Set> <Management Settings> <Security Settings> <System Verification Settings>
<Management Settings> <Security Settings> <System Verification Settings>When the machine is operating, the McAfee Embedded Control function is used to prevent unauthorized program modification and the execution of unauthorized programs, for improved system reliability.
|
To set this function to <On>, it is necessary to set <Verify System at Startup> to <On> in advance. When this function is set to <On>, startup takes longer than when it is set to <Off>. |