<Preferences> <Display Settings><Display Settings>
This section describes the display settings.
<Button Display Order on Home Screen>
<Set> <Preferences> <Display Settings>
<Preferences> <Display Settings>You can rearrange the order in which the buttons appear on the <Home> screen. Customizing the <Home> Screen
<Default Screen After Startup/Restoration>
<Set> <Preferences> <Display Settings>
<Preferences> <Display Settings>You can set the default screen displayed at startup/restoration.
<Language>
<Set> <Preferences> <Display Settings>
<Preferences> <Display Settings>You can select the language displayed on the display.
 |
Some messages may not be displayed properly in the selected language. In this case, restart the machine. Some messages may not change even after the machine is restarted. |
<Millimeter/Inch Entry Switch>
<Set> <Preferences> <Display Settings>
<Preferences> <Display Settings>You can set whether to enter numeric values in millimeters or inches on the various numeric entry screens.
<IP Address Display Settings>
<Set> <Preferences> <Display Settings>
<Preferences> <Display Settings>You can set whether to display the IP address on the <Status Monitor> screen.
|
This setting is only valid when <Use IPv4> is set to <On>. |
<Display Icon Showing Remaining Toner>
<Set> <Preferences> <Display Settings>
<Preferences> <Display Settings>You can set whether to display an icon indicating the amount of toner remaining in the toner cartridge on the bottom right of the display.
<Display Mobile Portal>
<Set> <Preferences> <Display Settings>
<Preferences> <Display Settings>You can set whether to display <Mobile Portal> on the <Home> screen.