<Preferences> <External Interface> <USB Settings><External Interface>
This section describes the USB settings.
<Use as USB Device>
<Set> <Preferences> <External Interface> <USB Settings>
<Preferences> <External Interface> <USB Settings>You can set whether to use the machine as a USB device.
 |
If this is set to <Off>, print jobs from a computer connected via USB cable cannot be performed. Changes in settings are effective after performing <Apply Set. Changes> on the <Home> screen. |
<Use AddOn Driver for USB Storage Device>
<Set> <Preferences> <External Interface> <USB Settings>
<Preferences> <External Interface> <USB Settings>You can set whether to use the AddOn driver for USB external storage.
 |
Depending on the type of AddOn application that uses USB external memory device, you may need to set this to <On>. To check whether you need to set this to <On>, see the manual for the AddOn application you are using, or contact your dealer or service representative. |
|
Changes in settings are effective after performing <Apply Set. Changes> on the <Home> screen. |
<Use USB Storage Device>
<Set> <Preferences> <External Interface> <USB Settings>
<Preferences> <External Interface> <USB Settings>You can set whether to allow the use of USB external storage devices.
|
Changes in settings are effective after performing <Apply Set. Changes> on the <Home> screen. |
<Restrict Auto Install of Printer Driver>
<Set> <Preferences> <External Interface> <USB Settings>
<Preferences> <External Interface> <USB Settings>This enables you to prevent a new printer driver from being installed when switching machines with multiple machines connected via USB.
|
Set this to <Off> when using a USB hub to connect multiple machines. |
|
Changes in settings are effective after performing <Apply Set. Changes> on the <Home> screen. |