<Maintenance>

This section describes how to use the auto cleaning function for the main unit.

<Clean Pressure Roller for Fixing>

<Set>

If printed paper is dirty, execute <Clean Pressure Roller for Fixing>.

<Initialize After Replacing Parts>

<Set>

After replacing the USER MAINTENANCE KIT UM-D1 230V, execute <Maintenance Kit> to perform initialization.

<Control Detected Condensation>

<Set>

Set whether to start the process to remove condensation when condensation is detected inside the machine. If you set this mode to <On>, the process to remove condensation is automatically performed.


During the process to remove condensation, printing may not be performed correctly resulting in the paper being blank. To maintain the effect of the process to remove condensation going when this mode is set to <On>, it is necessary to keep the machine's power ON.


If you select <On> and press <OK>, a screen asking whether to immediately perform the process to remove condensation is displayed. If you want to immediately start the process to remove condensation, press <Yes>.