Restarting the Machine
When you make changes to the settings of the machine, you may have to restart the machine to apply the changes depending on the setting.
When you change the settings using either the operation panel or Remote UI, you can restart the machine using the power switch.
Restarting the machine deletes any data waiting to be printed.
When you change the settings using either the operation panel or Remote UI, you can restart the machine using the power switch.
Restarting the machine deletes any data waiting to be printed.
For the touch panel model, the following data remains stored without being deleted even if the machine is restarted: Received data saved in the memory Data waiting to be sent Reports to be printed automatically after data is sent or received |
1
Press the power switch.
The operation panel turns off, and the power turns OFF.
It may take a few minutes until the power turns OFF.
It may take a few minutes until the power turns OFF.
2
Wait at least 10 seconds after turning OFF the power before pressing the power switch.
The machine starts up.