The Printed Barcode Cannot be Scanned

Troubleshoot by checking in the following order:

Are You Using a Very Small Barcode or One With Thick Lines?

Enlarge the barcode.

If the barcode lines are perpendicular to the output feed direction, rotate the image 90° so that the lines are parallel.

Try using Barcode Adjustment Mode

Setting [Barcode Adjustment Mode] to [Mode 1] in the printer driver may solve the problem. If that does not work, try selecting [Mode 2] and then [Mode 3] in sequence.

Specify the settings below in the [Printing preferences] screen of the printer driver.

[Finishing] tab

[Advanced Settings]

[Barcode Adjustment Mode]

select the mode

* When this setting is enabled, the print density may decrease.

If setting [Barcode Adjustment Mode] to [Mode 3] does not work, changing the [Printer Density] may solve the problem.[Printer Density]